数字化技术在可摘局部义齿和全口义齿制作中的应用现状与未来

doi:10.13591/j.cnki.kqyx.2022.05.001

口腔医学 ›› 2022, Vol. 42 ›› Issue (5): 385-390.doi: 10.13591/j.cnki.kqyx.2022.05.001

• 述评 • 下一篇

数字化技术在可摘局部义齿和全口义齿制作中的应用现状与未来

吴江, 陈吉华

口腔疾病国家临床医学研究中心,军事口腔医学国家重点实验室,陕西省口腔医学重点实验室, 第四军医大学口腔医院修复科,陕西西安(710032)

修回日期:2022-02-15 发布日期:2022-05-24
通讯作者: 陈吉华 E-mail: jhchen@fmmu.edu.cn
作者简介:陈吉华,空军军医大学口腔医院教授,主任医师,博导,口腔修复专家;教育部长江学者特聘教授;中华口腔医学会修复专委会主任委员,全军口腔医学专委会主任委员;口腔疾病国家临床医学研究中心主任。主要从事口腔修复技术及相关的牙科全瓷材料、高分子修复材料及仿生功能化材料的研究。主持教育部“创新团队发展计划”项目、国科金国际合作与交流项目及重点项目等国家、省部级及军队科研任务18项。发表SCI收录文章100余篇。获中华口腔医学会和陕西省科技进步一等奖共3项;获批国家发明及实用新型专利20余项;主编教材和专著7部。先后培养硕、博士研究生100余名,指导研究生多次获得全军及陕西省优秀博士、硕士研究生论文及各类科研学术及人才奖励。吴江,空军军医大学口腔医院副教授、副主任医师,硕士研究生导师。现任中华口腔医学会口腔修复学专委会委员,口腔计算机专委会委员和口腔教育专委会委员,陕西省光学学会理事。主持2项国家自然科学基金项目,1项陕西省重点研发计划,作为课题组重要成员参加了科技部重大专项、陕西省科技重大专项等项目研究。两获日中世川医学奖学金赴日本留学,荣获中华口腔医学会青年教师授课技能大赛一等奖,空军院校2020育鹰尖兵教学比武唯一一等奖,陕西省科技工作者创新创业大赛一等奖等。专业方向为口腔修复的数字化设计、特别是3D打印技术在口腔修复中的应用。以第一作者/通信作者发表SCI收录论文16篇,第一发明人授权发明专利2项。
基金资助:
陕西省重点研发计划(2020ZDLSF04-06);国家口腔疾病临床医学中心专项课题(LCB202007)

Current application and future of digital technology in the manufacture of removable partial denture and complete denture

WU Jiang, CHEN Jihua

National Clinical Research Center for Oral Diseases&State Key Laboratory of Military Stomatology &Shaanxi Key Laboratory of Stomatology, Department of Prosthodontics,School of Stomatology, The Fourth Military Medical University, Xi′an 710032,China

Revised:2022-02-15 Published:2022-05-24

摘要/Abstract

摘要： 数字化技术的发展为可摘局部义齿/全口义齿的设计和制作提供了全新的选择,具有高精度、高质量和高效率的特点。其中,本文就数字化印模、数字化设计与数字化制作这三个关键因素进行了重点讨论。

关键词: 数字化技术, 可摘局部义齿, 全口义齿

Abstract: Equipped with characteristics of high precision, high quality and high efficiency, the development of digital technology provides a new alternative for the design and manufacture of removable partial denture/complete denture. In this paper, three key factors of digital impression, digital design and digital manufacturing were discussed.

Key words: digital technology, removable partial denture, complete denture

中图分类号:

R783.6

吴江, 陈吉华. 数字化技术在可摘局部义齿和全口义齿制作中的应用现状与未来[J]. 口腔医学, 2022, 42(5): 385-390.

WU Jiang, CHEN Jihua. Current application and future of digital technology in the manufacture of removable partial denture and complete denture[J]. Stomatology, 2022, 42(5): 385-390.

参考文献

[1] 王兴. 第四次全国口腔健康流行病学调查报告[M]. 北京: 人民卫生出版社, 2018.
[2] Friel T, Waia S. Removable partial dentures for older adults[J]. Prim Dent J, 2020, 9(3):34-39.
[3] Duret F, Blouin JL, Duret B. CAD-CAM in dentistry[J]. J Am Dent Assoc, 1988, 117(6):715-720.
[4] Kattadiyil MT, Goodacre CJ, Baba NZ. CAD/CAM complete dentures: A review of two commercial fabrication systems[J]. J Calif Dent Assoc, 2013, 41(6):407-416.
[5] Alghazzawi TF. Advancements in CAD/CAM technology: Options for practical implementation[J]. J Prosthodont Res, 2016, 60(2):72-84.
[6] Kattadiyil MT, Mursic Z, AlRumaih H,et al. Intraoral scanning of hard and soft tissues for partial removable dental prosthesis fabrication[J]. J Prosthet Dent, 2014, 112(3):444-448.
[7] Wu J, Li Y, Zhang YM. Use of intraoral scanning and 3-dimensional printing in the fabrication of a removable partial denture for a patient with limited mouth opening[J]. J Am Dent Assoc, 2017, 148(5):338-341.
[8] Lo Russo L, Salamini A. Single-arch digital removable complete denture: A workflow that starts from the intraoral scan[J]. J Prosthet Dent, 2018, 120(1):20-24.
[9] Deng KH, Wang Y, Zhou YS,et al. Functionally suitable digital removable complete dentures: A dental technique[J]. J Prosthet Dent, 2020, 123(6):795-799.
[10] Strub JR, Rekow ED, Witkowski S. Computer-aided design and fabrication of dental restorations: Current systems and future possibilities[J]. J Am Dent Assoc, 2006, 137(9):1289-1296.
[11] Barazanchi A, Li KC, Al-Amleh B,et al. Additive technology: Update on current materials and applications in dentistry[J]. J Prosthodont, 2017, 26(2):156-163.
[12] Kanazawa M, Inokoshi M, Minakuchi S,et al. Trial of a CAD/CAM system for fabricating complete dentures[J]. Dent Mater J, 2011, 30(1):93-96.
[13] Goodacre CJ, Garbacea A, Naylor WP,et al. CAD/CAM fabricated complete dentures: Concepts and clinical methods of obtaining required morphological data[J]. J Prosthet Dent, 2012, 107(1):34-46.
[14] Bilgin MS, Erdem A, Aglarci OS,et al. Fabricating complete dentures with CAD/CAM and RP technologies[J]. J Prosthodont, 2015, 24(7):576-579.
[15] Wimmer T, Gallus K, Eichberger M,et al. Complete denture fabrication supported by CAD/CAM[J]. J Prosthet Dent, 2016, 115(5):541-546.
[16] Zoidis P, Papathanasiou I, Polyzois G. The use of a modified poly-ether-ether-ketone (PEEK) as an alternative framework material for removable dental prostheses. A clinical report[J]. J Prosthodont, 2016, 25(7):580-584.
[17] Wu J, Wang XB, Zhao XH,et al. A study on the fabrication method of removable partial denture framework by computer-aided design and rapid prototyping[J]. Rapid Prototyp J, 2012, 18(4):318-323.
[18] Vrancken B, Thijs L, Kruth JP, et al. Heat treatment of Ti₆Al₄V produced by selective laser melting: Microstructure and mechanical properties[J]. J Alloys Compd, 2012, 541:177-185.
[19] Williams RJ, Bibb R, Eggbeer D,et al. Use of CAD/CAM technology to fabricate a removable partial denture framework[J]. J Prosthet Dent, 2006, 96(2):96-99.
[20] Zhang Y, Luo J, Zhang YM,et al. Rehabilitation for a Scleroderma patient with severe microstomia using digital and conventional methods[J]. J Am Dent Assoc, 2020, 151(9):684-690.
[21] Zhang Y, Li K, Yu H,et al. Digital fabrication of removable partial dentures made of titanium alloy and zirconium silicate micro-ceramic using a combination of additive and subtractive manufacturing technologies[J]. Rapid Prototyp J, 2021, 27(1):93-98.
[22] 吴江, 王伟娜, 于海, 等. 应用数字化技术同期完成牙体及牙列缺损修复一例[J]. 中华口腔医学杂志, 2020, 55(10):754-756.
[23] Jamali J, Kolokythas A, Miloro M. Clinical applications of digital dental technology in oral and maxillofacial surgery[M]//Clinical Applications of Digital Dental Technology. Chichester, UK: John Wiley & Sons, Inc, 2015:207-230.
[24] Barazanchi A, Li KC, Al-Amleh B,et al. Additive technology: Update on current materials and applications in dentistry[J]. J Prosthodont, 2017, 26(2):156-163.
[25] 刘一帆, 于海, 王伟娜, 等. 选区激光熔化制作可摘局部义齿钛合金支架成形质量初探[J]. 中华口腔医学杂志, 2017, 52(6):351-354.
[26] 刘一帆, 王伟娜, 于海, 等. 选择性激光熔覆(SLM)钛合金可摘局部义齿支架的适合性研究[J]. 实用口腔医学杂志, 2017, 33(3):302-305.
[27] Abduo J, Lyons K, Bennamoun M. Trends in computer-aided manufacturing in prosthodontics: A review of the available streams[J]. Int J Dent, 2014, 2014:783948.
[28] Wu J, Cheng YC, Gao B,et al. A novel digital altered cast impression technique for fabricating a removable partial denture with a distal extension[J]. J Am Dent Assoc, 2020, 151(4):297-302.

数字化技术在可摘局部义齿和全口义齿制作中的应用现状与未来

Current application and future of digital technology in the manufacture of removable partial denture and complete denture

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	董梦璐, 杨孟孟, 李全利. 硅橡胶软衬材料表面构建仿章鱼吸盘微结构的体外研究[J]. 口腔医学, 2022, 42(4): 304-308.
[2]	钱飞, 辛海涛, 李玉姣, 刁晓鸥, 罗慧闻, 刘欢, 吴玉禄. 数字化可摘局部义齿支架设计优化方法研究[J]. 口腔医学, 2022, 42(12): 1073-1079.
[3]	张力姚丽娜林滔. 数字印模技术在下颌游离端可摘局部义齿制作中的应用[J]. , 2021, 41(12): 1111-1116.
[4]	操亚波傅露郁雯科王硕李伯休陈丹鹏. 数字化排牙试验在正畸病例拔牙与否判断中的应用[J]. , 2019, 39(1): 44-47.
[5]	张光建孔凡芝. 直接法和间接法在全口义齿重衬中的应用比较[J]. , 2018, 38(8): 724-727.
[6]	息雪娜张敏刘琳. 全口义齿平面前点确定方法的光弹性研究[J]. , 2018, 38(7): 620-623.
[7]	李敏孟翔峰. 下颌牙槽嵴重度吸收的两种牙合型全口义齿临床比较研究[J]. , 2017, 37(11): 1016-1020.
[8]	宋亮姚珏琦徐婕徐斌. 可摘局部义齿对Ⅱ型糖尿病患者龈沟液中IL-1β的影响[J]. , 2015, 35(3): 208-210.
[9]	沈晴昳李国强. 舌向集中与半解剖式全口义齿的满意度及咀嚼效能比较[J]. , 2015, 35(2): 124-127.
[10]	郅洁云韦丽琴. 长正中全口义齿修复无牙颌再诊患者咀嚼效能研究[J]. , 2015, 35(1): 44-46.
[11]	郑重阳谢广平盛美春. 生物功能性全口义齿修复对无牙颌患者脑血流量的影响[J]. , 2014, 34(8): 597-599.
[12]	郝志红. 种植体支持球帽附着体固位下颌覆盖全口义齿的临床应用[J]. , 2013, 33(8): 572-573.
[13]	吕新元,蔡琪. 复合树脂对基牙改形在可摘局部义齿修复中的应用[J]. , 2012, 32(5): 318-320.
[14]	祝海霆,吴　琳. 可摘局部义齿卡环疲劳的影响因素[J]. , 2012, 32(3): 184-186.
[15]	柴璐毅,刘丽,张烈焚. 肌电图在无牙颌修复治疗和疗效评估中的应用[J]. , 2012, 32(2): 112-114.