种植义齿即刻负重技术的临床进展

›› 2016, Vol. 36 ›› Issue (12): 1142-1144.

种植义齿即刻负重技术的临床进展

汤易,汤春波

江苏省口腔医院

收稿日期:2016-06-29 修回日期:2016-07-23 出版日期:2016-12-28 发布日期:2016-12-20
通讯作者: 汤春波 E-mail:cbtang@njmu.edu.cn
基金资助:
Periostin在纯钛种植体表面促进仿生性牙周膜再生的作用机制研究

Clinical progress of immediate implant loading technique ：a review

Yi TANG¹,

Received:2016-06-29 Revised:2016-07-23 Online:2016-12-28 Published:2016-12-20

摘要/Abstract

摘要： 种植义齿即刻负重技术由于其缩短病人的治疗周期和良好的预后成为现代种植修复的潮流。本文将对种植义齿即刻负重技术的临床应用和发展前景做一综述。

关键词: 即刻负重, 即刻修复, 初期稳定性, All-On-4, 微创种植

Abstract: Immediate implant loading technique has gained its popularity for the short treatment period and good prognosis. This paper will review the clinical application and development prospect of immediate implant loading technique.

Key words: Immediate Loading, Immediate Restoration, Primary Stability, All-On-4, Atraumatic Implantation

中图分类号:

R783.3

汤易汤春波. 种植义齿即刻负重技术的临床进展[J]. , 2016, 36(12): 1142-1144.

Yi TANG. Clinical progress of immediate implant loading technique ：a review[J]. , 2016, 36(12): 1142-1144.

参考文献

[1]Branemark P I. Osseointegration and its experimental background[J]. J Prosthet Dent, 1983, 50(3): 399-410.
[2]Penarrocha-Oltra D, Covani U, Penarrocha-Diago M, et al. Immediate loading with fixed full-arch prostheses in the maxilla: review of the literature[J]. Med Oral Patol Oral Cir Bucal, 2014, 19(5): e512-7.
[3]Yamada J, Kori H, Tsukiyama Y, et al. Immediate loading of complete-arch fixed prostheses for edentulous maxillae after flapless guided implant placement: a 1-year prospective clinical study[J]. Int J Oral Maxillofac Implants, 2015, 30(1): 184-93.
[4]Degidi M, Piattelli A. Immediate functional and non-functional loading of dental implants: a 2- to 60-month follow-up study of 646 titanium implants[J]. J Periodontol, 2003, 74(2): 225-41.
[5]Chrcanovic B R, Albrektsson T, Wennerberg A. Immediate nonfunctional versus immediate functional loading and dental implant failure rates: a systematic review and meta-analysis[J]. J Dent, 2014, 42(9): 1052-9.
[6]徐普, 杨玄. 种植体即刻负重的临床修复设计[J]. 中华口腔医学杂志, 2010, 45(4): 252-255.
[7]Barndt P, Zhang H, Liu F. Immediate loading: from biology to biomechanics. Report of the Committee on Research in fixed Prosthodontics of the American Academy of fixed Prosthodontics[J]. J Prosthet Dent, 2015, 113(2): 96-107.
[8]Ghoul W E, Chidiac J J. Prosthetic requirements for immediate implant loading: a review[J]. J Prosthodont, 2012, 21(2): 141-54.
[9]Chiapasco M. Early and immediate restoration and loading of implants in completely edentulous patients[J]. Int J Oral Maxillofac Implants, 2004, 19 Suppl: 76-91.
[10]Malo P, Rangert B, Nobre M. "All-on-Four" immediate-function concept with Branemark System implants for completely edentulous mandibles: a retrospective clinical study[J]. Clin Implant Dent Relat Res, 2003, 5 Suppl 1: 2-9.
[11]Chung S, Mccullagh A, Irinakis T. Immediate loading in the maxillary arch: evidence-based guidelines to improve success rates: a review[J]. Journal of Oral Implantology, 2011, 37(5): 610-21.
[12]Canullo L, Goglia G, Iurlaro G, et al. Short-term bone level observations associated with platform switching in immediately placed and restored single maxillary implants: a preliminary report[J]. Int J Prosthodont, 2009, 22(3): 277-82.
[13]Xu L, Wang X, Zhang Q, et al. Immediate versus early loading of flapless placed dental implants: a systematic review[J]. J Prosthet Dent, 2014, 112(4): 760-9.
[14]Turkyilmaz I. Immediate provisional restoration of implant placed using flapless surgery and ridge mapping. Case report[J]. N Y State Dent J, 2011, 77(3): 21-3.
[15]Trisi P, Perfetti G, Baldoni E, et al. Implant micromotion is related to peak insertion torque and bone density[J]. Clin Oral Implants Res, 2009, 20(5): 467-71.
[16]Szmukler-Moncler S, Salama H, Reingewirtz Y, et al. Timing of loading and effect of micromotion on bone-dental implant interface: review of experimental literature[J]. J Biomed Mater Res, 1998, 43(2): 192-203.
[17]黄建生, 朱晓斌. 种植体支持套筒冠固位全口覆盖义齿即刻负重3例[J]. 华西口腔医学杂志, 2009, 27(4): 461-464.
[18]Kollmuss M, Kist S, Goeke J E, et al. Comparison of chairside and laboratory CAD/CAM to conventional produced all-ceramic crowns regarding morphology, occlusion, and aesthetics[J]. Clin Oral Investig, 2016, 20(4): 791-7.