基于CBCT图像建立磨牙分根术后冠修复的三维有限元模型

›› 2015, Vol. 35 ›› Issue (12): 1028-1031.

基于CBCT图像建立磨牙分根术后冠修复的三维有限元模型

李可¹,王桃²,张晓²,张朋²,刘瑶¹

1. 长沙市口腔医院
2. 河南省口腔医院

收稿日期:2015-04-07 修回日期:2015-05-24 出版日期:2015-12-28 发布日期:2015-12-15
通讯作者: 王桃 E-mail:zzwangtao2005@sina.com
基金资助:
河南省教育厅科学技术研究重点项目

To establish three-dimensional finite element model of the mandibular first molar with single and combined crown after separation prosthodontic therapy

Received:2015-04-07 Revised:2015-05-24 Online:2015-12-28 Published:2015-12-15

摘要/Abstract

摘要： 目的建立下颌第一磨牙分根术后单冠和联冠修复的三维有限元模型，为冠修复的生物力学分析奠定基础。方法通过CBCT扫描获取断层图像，利用Mimics软件读取图像并进行初步处理， Geomagic软件精修，造型软件UG装配各模块及有限元软件Ansys划分网格。结果建立下颌第一磨牙、分根术后联冠与单冠修复下颌第一磨牙以及牙周支持组织的三维有限元模型。结论利用CBCT扫描结合逆向工程软件Mimics、Geomagic，造型软件UG，有限元软件Ansys能够快捷有效的建立三维有限元模型。

关键词: 分根术, 三维有限元, 单冠, 联冠, 下颌第一磨牙

Abstract: Objective To establish a three-dimensional finite element model of a mandibular first molar with single and combined crown after separation prosthodontic therapy for biomechanical analysis of crown prosthesis. Methods The 3-D finite element model was established with CBCT scanning method. Mimics software was used to read and deal with the tomography data preliminarily, Geomagic software was for precise modification, and UG software was utilized to assemble all of the modules and Ansys software to divide gridding. Result The 3-D finite element models of the mandibular first molar with normal structure and the molar treated with separation prosthodontic therapy were established. Conclusions It was feasible, fast and effective to use the modeling approach of CBCT scan combined with reverse engineering software Mimics and Geomagic, modeling software UG, the finite element analysis software Ansys to establish the 3D finite element model.

Key words: separating root, 3D finite element method, single crown, combined crown, mandibular first molar

中图分类号:

R783.4

李可王桃张晓张朋刘瑶. 基于CBCT图像建立磨牙分根术后冠修复的三维有限元模型[J]. , 2015, 35(12): 1028-1031.

参考文献

[1]Yadav P,Tahir M,Kumar MV,et al.Prosthetic Rehabilitation of a Hemisected Maxillary Molar： A Rare Entity[J].J Indian Prosthodont Soc,2013,13(3):373-377
[2]王懿,张少锋,王延勇,等.磨牙半切术后修复治疗的三维有限元应力分析[J].临床口腔医学杂志,2004,20(2):77-79
[3]汪文银,朱友家.分根术加全冠修复大面积髓室底穿孔磨牙的临床疗效观察[J].临床口腔医学杂志,2013,29(4):237-238
[4]Rees JS,Jacobsen PH.Modeling the effect of enamel anisotropy with the finite element method[J].J Oral Rehabil,1995,22(6):451-454
[5]吴张,辛海涛,马轩祥,等.龈下残根桩核冠修复的三维有限元模型建立[J].牙体牙髓牙周病学杂志,2011,21(2):86-89
[6]Ehsani S,Mirhashemi FS,Asgary S.Finite element reconstruction of a mandibular first molar[J].Iran Endod J,2013,8(2):44-47
[7]Okamoto K,Ino T,Iwase N,et al.Threedimensional finite element analysis of stress distribution in composite resin cores with fiber posts of varying diameters[J].Dent Mater J,2008,27(1):49-55
[8]Savadi RC,Agarwal J,Agarwal RS,et al.Influence of Implant Surface Topography and Loading Condition on Stress Distribution in Bone Around Implants： A Comparative 3D FEA[J].J Indian Prosthodont Soc,2011,11(4):221-231
[9]Eliguzeloglu E,Eraslan O,Omurlu H,et al.The effect of cavity shape and hybrid layer on the stress distribution of cervical composite restorations[J].Eur J Dent,2011,5(2):180-185
[10]Geramy A,Sodagar A,Hassanpour M.Threedimensional analysis using finite element method of anterior teeth inclination and center of resistance location[J].Chin J Dent Res,2014,17(1):37-42
[11]Santos Filho PC,Soares PV,Reis BR,et al.Effects of threaded post placement on strain and stress distribution of endodontically treatedteeth[J].Braz Oral Res,2013,27(4):305-310
[12]Chun KJ,Lee JY.Comparative study of mechanical properties of dental restorative materials and dental hard t5s in compressive loads[J].J Dent Biomech,2014,11(5):175-178
[13]Meijer HJ,Starmans FJ,Bosman F,et al.A comparison of three finite element models of an edentulous mandible provided with implants[J].J Oral Rehabil,1993,20(2):147-157
[14]Turner MS,Clough RW,Martin HC,et al.Stiffness and deflection analysis of complex structure[J].J Aero Sci,1956,23(1):805-
[15]杨雷宁,张少锋,王艳清.CBCT全牙列牙冠三维数字化模型的研究[J].牙体牙髓牙周病学杂志,2011,21(4):214-217
[16]张坤,姜晓峰,许坚.一种 NURBS 曲面拟合精度的量化评测算法[J].计算机应用及软件,2011,28(12):283-285
[17]李海泳.UG 装配模块在某型燃机数字化样机的应用[A][J].北京，中国机械工程学会2006 e-works 产品创新数字化国际峰会论文集,2006,11(1):88-94