纤维增强聚甲基丙烯酸甲酯材料的研究进展

摘要/Abstract

摘要： ［摘要］聚甲基丙烯酸甲酯(PMMA)义齿基托材料是目前使用最广泛的义齿基托材料,但其在机械性能方面还存在一定缺陷，基于此，近年来许多学者致力于对其改性的研究。研究结果显示,添加一些纤维增强材料,可以使PMMA义齿基托材料的性能得到明显改善。本文结合近十几年来发表的文章,主要强调纤维对其性能的影响,对PMMA义齿基托材料改性的研究进展作一综述。

关键词: 聚甲基丙烯酸甲酯, 改性, 纤维

Abstract: Polymethyl methacrylate (PMMA) denture base material is the most widely used to fabricate denture bases due to its various advantages. However, this material is still far from ideal in fulfilling the mechanical requirements of a prosthesis. Therefore，scholars have devoted themselves to its modification in recent years. Many studies have reported improvement of PMMA denture base material with the addition of fibers reinforcement. This paper reviews polymethyl methacrylate denture base material enhancement combined with the articles published during the recent decades. Specific attention is given to the effect of fibers on polymethyl methacrylate properties.

Key words: Polymethyl methacrylate , reinforcement, fiber

中图分类号:

　R783.1

黄天意刘璐王晓容. 纤维增强聚甲基丙烯酸甲酯材料的研究进展[J]. , 2019, 39(8): 753-756.

参考文献 33

[1]	Meng TR Jr, Latta MA.Physical properties of four acrylic denture base resins[J].J Contemp Dent Pract, 2005, 6(4):93-100
[2]	Alla R, Raghavendra K N, Vyas R, et al.Conventional and contemporary polymers for the fabrication of denture prosthesis: part I–overview,composition and properties[J].Int J Appl Dent Sci, 2015, 1(4):82-89
[3]	Yazdanie N, Mahood M.Carbon fiber acrylic resin composite: an investigation of transverse strength[J].J Prosthet Dent, 1985, 54(4):543-547
[4]	Jagger DC, Harrison A, Jandt KD.The reinforcement of dentures[J].J Oral Rehabil, 1999, 26(3):185-194
[5]	Chen SY, Liang WM, Yen PS.Reinforcement of acrylic denture base resin by incorporation of various fibers[J].J Biomed Mater Res, 2001, 58(2):203-208
[6]	zen J, Sipahi C, ?A?LAR A, et al.In vitro cytotoxicity of glass and carbon fiber-reinforced heat-polymerized acrylic resin denture base material[J].Turk J Med Sci, 2006, 36(2):121-126
[7]	Tandon R, Gupta S, Agarwal SK.Denture base materials: From past to future[J].Indian J Dent Sci, 2010, 2(2):33-39
[8]	Soygun K, Bolayir G, Boztug A.Mechanical and thermal properties of polyamide versus reinforced PMMA denture base materials[J].J Adv Prosthodont, 2013, 5(2):153-160
[9]	Hamedi Rad F, Ghaffari T, Tamgaji R.Evaluation of the Color Stability of Methyl Methacrylate and Nylon Base Polymer[J].J Dent (Shiraz), 2017, 18(2):136-142
[10]	Yu SH, Ahn DH, Park JS, et al.Comparison of denture base resin reinforced with polyaromatic polyamide fibers of different orientations[J].Dent Mater J, 2013, 32(2):332-340
[11]	Berrong JM, Weed RM, Young JM.Fracture resistance of Kevlar-reinforced poly(methyl methacrylate) resin: a preliminary study[J].Int J Prosthodont, 1990, 3(4):391-395
[12]	He X, Qu Y, Peng J, et al.A novel botryoidal aramid fiber reinforcement of a PMMA resin for a restorative biomaterial[J].Biomater Sci, 2017, 5(4):808-816
[13]	Yang A, Zhao D, Wu Y, et al.Effect of polyimide addition on mechanical properties of PMMA-based denture material[J].Dent Mater J, 2017, 36(5):560-565
[14]	Tacir IH, Kama JD, Zortuk M, et al.Flexural properties of glass fibre reinforced acrylic resin polymers[J].Aust Dent J, 2006, 51(1):52-56
[15]	Yu SH, Lee Y, Oh S, et al.Reinforcing effects of different fibers on denture base resin based on the fiber type,concentration,and combination[J].Dent Mater J, 2012, 31(6):1039-1046
[16]	Ozdemir AK, Polat NT.The effect of glass fiber distribution on the transverse strength and surface smoothness of two denture resins[J].Dent Mater J, 2003, 22(4):600-609
[17]	Nakamura M, Takahashi H, Hayakawa I.Reinforcement of denture base resin with short-rod glass fiber[J].Dent Mater J, 2007, 26(5):733-738
[18]	Moreno-Maldonado V, Acosta-Torres L S, Barceló-Santana F H, et al.Fiber-reinforced nanopigmented poly(methyl methacrylate) as improved denture base[J].Journal of Applied Polymer Science, 2012, 126(1):289-296
[19]	Dalkiz M, Arslan D, Tuncdemir A R, et al.Effect of different palatal vault shapes on the dimensional stability of glass fiber-reinforced heat-polymerized acrylic resin denture base material[J].Eur J Dent, 2012, 6(1):70-78
[20]	Fonseca RB, de Paula MS, Favar?o IN, et al.Reinforcement of dental methacrylate with glass fiber after heated silane application[J]. Biomed Res Int, 2014, 2014: 364398.
[21]	Debnath S, Wunder SL, McCool JI, et al.Silane treatment effects on glassresin interfacial shear strengths[J].Dent Mater, 2003, 19(5):441-448
[22]	Nagakura M, Tanimoto Y, Nishiyama N.Color stability of glass-fiber-reinforced polypropylene for non-metal clasp dentures[J].J Prosthodont Res, 2018, 62(1):31-34
[23]	Venkat R, Gopichander N, Vasantakumar M.Comprehensive analysis of repairreinforcement materials for polymethyl methacrylate denture bases: mechanical and dimensional stability characteristics[J].J Indian Prosthodont Soc, 2013, 13(4):439-449
[24]	Uzun G, Hersek N, Tin?er T.Effect of five woven fiber reinforcements on the impact and transverse strength of a denture base resin[J].J Prosthet Dent, 1999, 81(5):616-620
[25]	Paula E Silva E, Rosa EL, Barbosa SV.Tissue reactions of polypropylene mesh used in maxillofacial trauma[J].Braz Dent J, 2001, 12(2):121-125
[26]	Mowade TK, Dange SP, Thakre MB, et al.Effect of fiber reinforcement on impact strength of heat polymerized polymethyl methacrylate denture base resin: in vitro study and SEM analysis[J].J Adv Prosthodont, 2012, 4(1):30-36
[27]	Mathew M, Shenoy K, Ravishankar KS.Flexural strength of hydrogen plasma-treated polypropylene fiber-reinforced polymethyl methacrylate denture base material[J].J Indian Prosthodont Soc, 2018, 18(3):257-262
[28]	Mustafa MJ, Ismaeel IJ, Alalwan HKA.The effect of the addition of silanated poly propylene fiber to polymethylmethacrylate denture base material on some of its mechanical properties[J].J Bagh College Dentistry, 2015, 27(1):40-47
[29]	John J, Ann Mani S, Palaniswamy K, et al.Flexural properties of poly(methyl methacrylate) resin reinforced with oil palm empty fruit bunch fibers: a preliminary finding[J].J Prosthodont, 2015, 24(3):233-238
[30]	John M, Thomas S.Biofibres and biocomposites[J].Carbohydrate Polymers, 2008, 71(3):343-364
[31]	Kondo S, Nodasaka Y, Dent HU, et al.Acrylic Denture Base Material Reinforced with Japanese Paper[C]. I ADR General Session. Alexandria: International Association for Dental Research, 2010.
[32]	Kondo S, Nodasaka Y, Shimokoube H.Bend strength properties of jute fiber-reinforced denture base material[C]. IADR General Session. Alexandria: International Association for Dental Research, 2009.
[33]	Xu J, Li Y, Yu T, et al.Reinforcement of denture base resin with short vegetable fiber[J].Dent Mater, 2013, 29(12):1273-1279