[1] |
Malo P, de Araújo Nobre, Miguel, Lopes A, et al.A longitudinal study of the survival of All-on-4 implants in the mandible with up to 10 years of follow-up[J].Journal of the American Dental Association, 2011, 142(3):310-320
|
[2] |
Crespi R, Vinci R, Cappare P, et al.A clinical study of edentulous patients rehabilitated according to the "all on four" immediate function protocol[J].Int J Oral Maxillofac Implants, 2012, 27(2):428-434
|
[3] |
Aparicio C, Perales P, Rangert B.Tilted implants as an alternative to maxillary sinus grafting: a clinical,radiologic,and periotest study[J].Clin Implant Dent Relat Res, 2001, 3(1):39-49
|
[4] |
Chrcanovic B R, Albrektsson T, Wennerberg A.Reasons for failures of oral implants[J].J Oral Rehabil, 2014, 41(6):443-476
|
[5] |
Wells G, Shea B, O' connell J.The Newcastle-Ottawa Scale (NOS) for Assessing The Quality of Nonrandomised Studies in Meta-analyses[J]. Ottawa Health Research Institute Web site, 2014, 7.
|
[6] |
Ayub K V, Ayub E A, Lins Do Valle A, et al.Seven-Year Follow-up of Full-Arch Prostheses Supported by Four Implants: A Prospective Study[J].Int J Oral Maxillofac Implants, 2017, 32(6):1351-1358
|
[7] |
Balshi T J, Wolfinger G J, Slauch R W, et al.A retrospective analysis of 800 Branemark System implants following the All-on-Four protocol[J].J Prosthodont, 2014, 23(2):83-88
|
[8] |
Browaeys H, Dierens M, Ruyffelaert C, et al.Ongoing Crestal Bone Loss around Implants Subjected to Computer-Guided Flapless Surgery and Immediate Loading Using the All-on-4(R) Concept[J].Clin Implant Dent Relat Res, 2015, 17(5):831-843
|
[9] |
Capelli M, Zuffetti F, Del Fabbro M, et al.Immediate rehabilitation of the completely edentulous jaw with fixed prostheses supported by either upright or tilted implants: a multicenter clinical study[J].Int J Oral Maxillofac Implants, 2007, 22(4):639-644
|
[10] |
Francetti L, Romeo D, Corbella S, et al.Bone level changes around axial and tilted implants in full-arch fixed immediate restorationsInterim results of a prospective study[J].Clin Implant Dent Relat Res, 2012, 14(5):646-654
|
[11] |
Gherlone E F, Gianpaolo S, Andrea R, et al.Prefabricated Bar System for Immediate Loading in Edentulous Patients: A 5-Year Follow-Up Prospective Longitudinal Study[J].BioMed Research International, 2018, 27(2):1-7
|
[12] |
Lopes A, Malo P, De Araujo Nobre M, et al.The NobelGuide((R)) All-on-4((R)) Treatment Concept for Rehabilitation of Edentulous Jaws: A Retrospective Report on the 7-Years Clinical and 5-Years Radiographic Outcomes[J].Clin Implant Dent Relat Res, 2017, 19(2):233-244
|
[13] |
Malo P, De Araujo Nobre M, Lopes A, et al.All-on-4(R) Treatment Concept for the Rehabilitation of the Completely Edentulous Mandible: A 7-Year Clinical and 5-Year Radiographic Retrospective Case Series with Risk Assessment for Implant Failure and Marginal Bone Level[J]. Clin Implant Dent Relat Res, 2015, 17 Suppl 2: e531-541.
|
[14] |
Malo P, De Araujo Nobre M, Lopes A, et al." All-on-4" immediate-function concept for completely edentulous maxillae: a clinical report on the medium (3 years) and long-term (5 years) outcomes[J]. Clin Implant Dent Relat Res, 2012, 14 Suppl 1: e139-150.
|
[15] |
Malo P, Nobre M, Lopes A.Immediate loading of 'All-on-4' maxillary prostheses using trans-sinus tilted implants without sinus bone grafting: a retrospective study reporting the 3-year outcome[J].Eur J Oral Implantol, 2013, 6(3):273-283
|
[16] |
Canay S, Hersek N, Akpinar I, et al.Comparison of stress distribution around vertical and angled implants with finite-element analysis[J].Quintessence Int, 1996, 27(9):591-
|
[17] |
Watanabe F, Hata Y, Komatsu S, et al.Finite element analysis of the influence of implant inclination,loading position,and load direction on stress distribution[J].Odontology, 2003, 91(1):31-36
|
[18] |
Almeida E O, Rocha E P, Freitas Junior A C, et al.Tilted and short implants supporting fixed prosthesis in an atrophic maxilla: a 3D-FEA biomechanical evaluation[J]. Clin Implant Dent Relat Res, 2015, 17 Suppl 1: e332-342.
|
[19] |
Zampelis A, Rangert B, Heijl L.Tilting of splinted implants for improved prosthodontic support: a two-dimensional finite element analysis[J].J Prosthet Dent, 2007, 97(6 Suppl):S35-43
|
[20] |
Bellini C M, Romeo D, Galbusera F, et al.A Finite Element Analysis of Tilted Versus Nontilted Implant Configurations in the Edentulous Maxilla[J].International Journal of Prosthodontics, 2009, 22(2):155-157
|
[21] |
Vico G D, Bonino M, Spinelli D, et al.Rationale for tilted implants: FEA considerations and clinical reports[J].ORAL and Implantology, 2011, 4(3-4):23-33
|
[22] |
Wang T M, Leu L J, Wang J, et al.Effects of prosthesis materials and prosthesis splinting on peri-implant bone stress around implants in poor-quality bone: a numeric analysis[J].International Journal of Oral & Maxillofacial Implants, 2002, 17(2):231-
|
[23] |
Zampelis A, Rangert B, Heijl L.Tilting of splinted implants for improved prosthodontic support: A two-dimensional finite element analysis[J].Journal of Prosthetic Dentistry, 2007, 97(6 Suppl):S35-43
|
[24] |
Silva G C, José Alfredo Mendon?a, Lopes L R, et al.Stress patterns on implants in prostheses supported by four or six implants: a three-dimensional finite element a nalysis[J].International Journal of Oral & Maxillofacial Implants, 2010, 25(2):239-246
|
[25] |
Begg T, Geerts G A V M, Gryzagoridis J.Stress patterns around distal angled implants in the all-on-four concept configuration[J].international journal of oral & maxillofacial implants, 2009, 24(4):663-
|