CAD/CAM复合陶瓷材料表面处理的研究进展

Abstract

Abstract: With the continuous development of CAD/CAM technology, more and more CAD/CAM composite ceramic materials are applied to oral prosthetics, whose long-term repair effect depends largely on the bond strength of the prosthesis. The main factor that influences the bond strength between porcelain restoration and tooth is the surface treatment of the restoration. This paper reviews the research progress of surface treatment of CAD/CAM composite ceramic materials.

Key words: CAD/CAM ceramics, surface treatments, bonding strength

CLC Number:

R783.1

References 26

[1]	Mainjot AK, Dupont NM, Oudkerk JC, Dewael TY, Sadoun MJ.From Artisanal to CAD-CAM Blocks: State of the Art of Indirect Composites.[J].Journal of Dental Research, 2016, 95(5):487-495
[2]	[2 Mainjot AK, Dupont NM, Oudkerk JC, Dewael TY, Sadoun MJ.From Artisanal to CAD-CAM Blocks: State of the Art of Indirect Composites.[J].Journal of Dental Research, 2016, 95(5):487-495
[3]	Alvaro Della Bona, Audrea D. Nogueira, Oscar E,Pecho..Optical properties of CAD–CAM ceramic systems.[J].Journal of Dentistry, 2014, 42(9):1202-1209
[4]	Ruse ND, Sadoun MJ. Resin-composite blocks for dental CAD/CAM applications.[J].J Dent Res , 2014, 93(12):1232-1234
[5]	Matinlinna JP，Vallittu PK.Bonding of resin composites to etchable ceramic surface -an insight review of the chemical aspects on surface conditioning[J].J Oral Rehabil, 2007, 34(8):622-630
[6]	D.Sundfeld Neto,L.Naves,A.R.Costa,A.B.Correr,S.Consani,G.A.Borges,et al..Bonding of resin composites to etchable ceramic surface -an insight review of the chemical aspects on surface conditioning[J].Oper Dent , 2015, 40(47):470-479
[7]	Volkel T, Braziulis E.Monobond Etch & Prime[J]. Scientific Documentation , 2015, :-
[8]	Fabián Murillo-Gómez, Regina Guenka Palma-Dibb, Mario Fernando De Goes.Effect of acid etching on tridimensional microstructure of etchable CAD/CAM materials.[J].Dental Materials, 2018, 34(6):944-955
[9]	B.Yang,S.Wolfart,M.Scharnberg,K.Ludwig,R.Adelung,M.Kern..Influence of contamination on zirconia ceramic bonding.[J].J Dent Res, 2007, 86(8):749-753
[10]	Kumiko Yoshihara, Noriyuki Nagaoka, Yukinori Maruo, Goro Nishigawa, Masao Irie, Yasuhiro Yoshida, Bart Van Meerbeek.Sandblasting may damage the surface of composite CAD–CAM blocks.[J].Dental Materials35, 2007, 33(3):124-135
[11]	Tek?e, N.,Tuncer,S.,Demirci, M.,Kara,D.and Baydemir, C..Microtensile Bond Strength of CAD/CAM Resin Blocks to Dual-Cure Adhesive Cement: The Effect of Different Sandblasting Procedures.[J].official journal of the American College of Prosthodontists???, 2018, :-
[12]	Strasser, Thomas; Preis, Verena; Behr, Michael, et al.Roughness, surface energy, and superficial damages of CAD/CAM materials after surface treatment.[J].Clin Oral Invest, 2018, 22(8):2787-2797
[13]	Yoshihara K, Nagaoka N, Maruo Y, Nishigawa G, Irie M, Yoshida Y, van Meerbeek B.Sandblasting may damage the surface of composite CAD-CAM blocks. [J].Dent Mater , 2017, 33(3):124-135
[14]	Della Bona A，Donassollo TA，Demarco FF，et al.Characterization and surface treatment effects on topography of a glass -infiltrated alumina/zirconia-reinforced ceramic [J]. [J].Dent Mater, 2007, 23(6):769-775
[15]	Kern M，Thompson VP.Sandblasting and silica coating of a glass-infiltrated alumina ceramic：Volume loss，morphology，and changes in the surface composition[J]. [J].J Prosthet Dent , 1994, 71(5):453-461
[16]	Tekce, N, Tuncer, S, Demirci, M.Microtensile Bond Strength of CAD/CAM Resin Blocks to Dual-Cure Adhesive Cement: The Effect of Different Sandblasting Procedures.[J].JOURNAL OF ADVANCED PROSTHODONTICS, 2018, 10(3):211-217
[17]	Ali, Alghamdi，Takagaki, Tomohiro, et al.Influence of Ambient Air and Different Surface Treatments on the Bonding Performance of a CAD/CAM Composite Block.[J].J Adhes Dent 2018 20 (4):317-324, 2018, 20(4):317-324
[18]	Higashi M, Matsumoto M, Kawaguchi A, et al.Bonding effectiveness of self‐adhesive and conventional‐type adhesive resin cements to CAD/CAM resin blocks.Part 1: Effects of sandblasting and silanization. [J].Dent Mater , 2016, 35(1):21-28
[19]	K?mürcüo?lu MB, Sa??rkaya E, Tulga A.Influence of different surface treatments on bond strength of novel CAD/CAM restorative materials to resin cement.[J].J Adv Prosthodont, 2017, 9(6):439-446
[20]	Higashi M, Matsumoto M, Kawaguchi A, et al.Bonding effectiveness of self‐adhesive and conventional‐type adhesive resin cements to CAD/CAM resin blocks.Part 1: Effects of sandblasting and silanization.[J]. Dent Mater , 2016, 35(1):21-28
[21]	Barutcigil K, Barutcigil ?, Kul E, et?al..Effect of different surface treatments on bond strength of resin cement to a CAD/CAM restorative material.[J]., 2016, :-
[22]	Ural C, Kulunk T, Kulunk S, Kurt M .The effect of laser treatment on bonding between zirconia ceramic surface and resin cement.[J].Acta Odontol Scand, 2010, 68(6):354-359
[23]	Rocca JP, Fornaini C, Brulat N, Seif B, Darque ceretti E .CO2 and Nd:YAP laser interaction with lithium disilicate and zirconia dental ceramics: a preliminary study. [J].Opt Laser Technol , 2014, 57(SI):216-223
[24]	El Gamal A, Rocca JP, Fornaini C, Muhammad O, Medioni E, Cucinotta A, Brulat-Bouchard N .The effect of CO2?and Nd:YAP lasers on CAD/CAM ceramics: SEM, EDS and thermal studies.[J]. Laser Ther , 2016, 25(1):27-34
[25]	Secilmis A, Ustun O, Buyukhatipoglu IK.?Evaluation of the shear bond strength of two resin cements on different CAD/CAM materials.[J].J Adhes Sci Tech, 2016, 30(9):983-993
[26]	Mirzaei M, Yasini E, Tavakoli A, et?al..?Effect of different powers of Er,Cr:YSGG laser treatment on surface morphology of microhybride composite resin: scanning electron microscope (SEM) Evaluation.[J].J Lasers Med Sci?2015;6(2):62‐66, 2015, 6(2):62-66

Research progress on surface treatment of CAD/CAM composite ceramic materials

Knowledge

Abstract

Cite this article

share this article

References 26

Related Articles 4

Recommended Articles

Metrics

Comments

[1]	. Chemical evidence of the combination of a phosphate ester monomer PENTA and dental material zirconia [J]. , 2018, 38(3): 217-221.
[2]	. Effects of phosphate ester monomers in alkaline environment on bond strength of zirconia ceramics [J]. , 2018, 38(12): 1068-1073.
[3]	. Effect of TiO2 nanoparticles on the antibacterial effects and tensile bonding strength of orthodontic adhesive [J]. , 2016, 36(7): 591-594.
[4]	. Influence of surface treatment on the bonding strength of the tray and silicone rubber [J]. , 2016, 36(12): 1070-1073.