成人颅面复合体三维有限元模型的建立

›› 2014, Vol. 34 ›› Issue (5): 334-338.

成人颅面复合体三维有限元模型的建立

杜娟¹,胡芳²,王林²,倪晓宇³

1. 南京医科大学附属淮安市第一人民医院
2. 南京医科大学附属口腔医院
3. 南京林业大学机械电子工程学院

收稿日期:2013-06-25 修回日期:2013-08-05 出版日期:2014-05-28 发布日期:2014-06-04
通讯作者: 王林 E-mail:nydwlktz@gmail.com
基金资助:
江苏省135重点人才项目

Construction of threedimensional finite element model of adult craniofacial complex

Received:2013-06-25 Revised:2013-08-05 Online:2014-05-28 Published:2014-06-04

摘要/Abstract

摘要： 目的建立成人颅面复合体三维有限元模型，为进一步研究腭部种植支抗进行上颌扩大的可行性及其与牙支抗的对比研究建立数学模型基础。方法采用螺旋CT断层扫描成年人颅面复合体，计算机图像处理和转录技术，自编程序和ANSYS软件相结合建立颅面复合体的三维有限元模型。结果建立了具有良好几何相似性和生物力学相似性的颅面复合体三维有限元模型。结论模型精确地重建了骨密质和骨松质成分，适合用于上颌快速扩大术（RME）的生物力学分析。

关键词: 螺旋CT, 颅面复合体, 三维有限元模型, 上颌快速扩大

Abstract: Objective To construct a threedimensional finite element model of adult craniofacial complex for the further investigation of the feasibility of palatal implant anchorage for RME in adults and the comparative study between the toothborne RME and the boneborne one.Methods Spiral CT was used to scan adult craniofacial complex,and the computer image processing and transcription technique and ANSYS were employed to establish the three dimensional finite element model.〗Results A three dimensional finite element model was successfully constructed,which had great geometrical characters and biomechanical similarity.Conclusions This model precisely reconstructed cortical and cancellous bone as what they really are,which is suitable for biomechanical analysis of RME.

Key words: spiral CT scan, craniofacial complex, three dimensional finite element model, RME 

中图分类号:

R783.5

杜娟胡芳王林倪晓宇. 成人颅面复合体三维有限元模型的建立[J]. 口腔医学, 2014, 34(5): 334-338.

参考文献

[1]Lanigan DT.Internal carotid artery and ophthalmic injuries[J].Oral Maxillofac Surg Clin North Am,1997,9(1):271-274
[2]Lanigan DT,Mintz SM.Complications of surgically assisted rapidpalatal expansion: Review of the literature and report of a case[J].J Oral Maxillofac Surg,2002,60(1):104-110
[3]Li KK,Meara JG,Rubin PA.Orbital compartment syndrome following orthognathic surgery[J].J Oral Maxillofac Surg,1995,53(8):964-968
[4]Cook SD,Klawitter J,Weinstein AM.A model for the mplant-bone interface characteristics of porous dental implants[J].J Dent Res,1982,61(8):1006-1009
[5]Borchers L,Reichart P.Three-dimensional stressdistribution around a dental implant at different stages of interface development[J].J Dent Res,1983,62(2):155-159
[6]吴丽萍，周杰，米君国.腭部种植支抗三维有限元模型的建立[J].中国实用美容整形外科杂志,2004,4(3):188-190
[7]Jafari A,Shetty K,Kumar M.Study on stress distribution and displacement of various craniofacial structures following application of transverse orthopedic forcesathree-dimensional FEM study[J].Angle Orthod,2003,73(1):12-20
[8]Williams,KR.Edmundson,JTOrthodontic tooth movement analysed by the Finite Element Method[J].,Biomaterials,1984,5(3):347-351
[9]Provatidis CG,Georgiopoulos B,Kotinas A,et al.Evaluation of craniofacial effects during rapid maxillary expansion through combined in vivo/in vitro and finite element studies[J].Euro Journal of Orthodontics,2008,30(3):437-448
[10]Baldawa RS,Bhad WA.Stress distribution analysis during an intermaxillary dysfunction:A 3-D FEM study of an adult human skull[J].Ann Maxillofac Surg,2011,1(1):19-25
[11]Iseri H,Tekkaya AE,Oztan O,et al.Biomechanical effect of rapid maxillary expansion on the craniofacial skeleton,studied by the finite element method[J].Eur J Orthod,1998,20(3):347-356
[12]赵志河，房兵，赵美英.颅面骨三维有限元模型的建立[J].华西口腔医学杂志,1994,12(4):298-300
[13]张彤,刘洪臣,王延荣,等.上颌骨复合体三维有限元模型的建立[J].中华口腔医学杂志,2000,35(5):374-376
[14]Provatidis CG.Parametric Finite Element Analysis and Closed-formSolutions in Orthodontics,Computer Methods in Biomechanics and Biomedical Engineering[J].Comput Methods Biomech Biomed Engin,2002,5(2):101-112
[15]Christopher G,Provatidis B,Georgiopoulos A,et al.On the FEM modeling of craniofacial changes during rapid maxillary expansion[J].Medical Engineering & Physics,2007,29(5):566-579
[16]Boryor A,Geiger M,Hohmann A,et al.Stress distribution and displacement analysis during an intermaxillary dysjunction- a three dimensional FEM study of a human skull[J].J Biomech,2008,41(2):376-382