数字化曲面体层摄影中颌弓长度及宽度对下颌后牙区影像垂直失真度的影响

›› 2014, Vol. 34 ›› Issue (7): 543-546.

数字化曲面体层摄影中颌弓长度及宽度对下颌后牙区影像垂直失真度的影响

徐婉莲¹,王慧明²

1. 浙江省杭州市第三人民医院
2. 浙江大学医学院附属第一医院口腔科

收稿日期:2013-06-13 修回日期:2013-08-20 出版日期:2014-07-28 发布日期:2014-08-04
通讯作者: 徐婉莲 E-mail:betty7766@gmail.com

Effect of mandibular arch width and length on uprightness distortion ratio of the mandibular posterior area in digital pantomography

Received:2013-06-13 Revised:2013-08-20 Online:2014-07-28 Published:2014-08-04

摘要/Abstract

摘要： 目的以锥束CT（CBCT）为参照，研究数字化曲面体层摄影中不同颌弓宽度和长度对下颌后牙区影像垂直失真度的影响。方法选取150例下颌颌弓正常患者的数字化曲面体层片及同期的CBCT，测量下颌后牙区相应邻牙近远中牙槽骨的高度，进行失真度的分析对比。结果以CBCT中测量值为标准，数字化曲面体层片中磨牙区影像失真率为(3.85+2.03)%，前磨牙区影像失真率为(4.78+2.15)%，其中颌弓宽度在40.3～42.5 mm,颌弓长度在20.5～23.4 mm时，影像的垂直失真度最小，磨牙区为(1.95+0.13)%，前磨牙区为(2.88+0.25)%。结论不同颌弓长度和宽度对数字化曲面体层片中颌骨垂直失真度有重要影响。

关键词: CBCT, 数字化曲面体层摄影, 颌弓宽度, 颌弓长度, 垂直失真度

Abstract: Objective To discuss the effect of different mandibular arch widths and lengths on uprightness distortion ratio of the mandibular posterior area in digital pantomography with cone beam CT (CBCT) as the reference. Methods 150 cases of patients with pantomography and CBCT were selected. The mesial and distal alveolar bone heights between adjacent teeth in mandibular posterior area were both measured, and the results were analyzed. Results Compared with CBCT,in digital pantomography, the uprightness distortion ratio of the mandibular molar area was (3.85+2.03)%,while that of the premolar area was (4.78+2.15)%. When the arch width was 40.3-42.5 mm and the length was 20.5-23.4 mm, the distortion ratio was in its minimum, and the ratio was (1.95+0.13)% in molar area and (2.88+0.25)% in premolar area. Conclusion The width and length of mandibular arch are important factors affecting uprightness distortion ratio in the digital pantomography.

Key words: CBCT, digital pantomography, mandibular arch width and length, uprightness distortion ratio

中图分类号:

R780.4

徐婉莲王慧明. 数字化曲面体层摄影中颌弓长度及宽度对下颌后牙区影像垂直失真度的影响[J]. 口腔医学, 2014, 34(7): 543-546.

参考文献

[1]Kuker W,NageleT,Korfel A,et al.Primary central nervous system lymphomas(PCNSL):MRI features at presentation in 100 patients[J].J Neuroradiology,2005,72(2):169-177
[2]刘鹏，刘雄.口腔数字化曲面体层摄影失真度的实验研究[J].重庆医学,2008,27(5):469-
[3]王劲茗，陆笑，汪永跃，等.数字化曲面体层摄影种植床失真率的定量研究[J].广东牙病防治,2007,15(7):294-
[4]Hatcher DC,Dial C,Mayorga C.Cone beam CT for pre-surgical assessment of implant sites[J].J Calif Dent Assoc,2003,31(11):825-833
[5]孙琴洲，吉利，钟小龙.全颌曲面体层片和根尖片测量线距准确性的对比研究[J].临床口腔医学杂志,2010,26(12):739-742
[6]张翀，刘明，赵宝红，等.CBCT和曲面断层在下颌后牙区种植中的应用价值分析[J].口腔颌面修复学杂志,2012,13(4):228-231
[7]杨臣杰，钱玉芬，陈振琦.锥形束CT在口腔领域的应用[J].现代口腔医学杂志,2010,24(3):227-
[8]Naitoh M,Nakahara K,Hiraiwa Y,et al.Observation of buccal foramen in mandibular body using cone-beam computed tomography[J].Okajimas Folia Anat Jpn,2009,86(1):25-29
[9]杨雷宁，张少锋，王艳清，等.CBCT全牙列牙冠三维数字化模型的研究[J].牙体牙髓牙周病学杂志,2011,21(4):214-217
[10]马绪臣.口腔颌面锥形束CT的临床应用[M].北京：人民卫生出版社，2011：23－34
[11]Wortche R.Hassfeld S，Lux CJ，et alClinical application of cone beam digital 35 tomography in children with cleft lip and palate[J].. Dentomaxillofac Radiol,2006,35(2):88-94
[12]Nair R,Deguchi TS,Li X,et al.Quantitative analysis of the maxilla and the mandible in hyper- and hypodivergent skeletal Class Ⅱ pattern[J].Orthod Craniofac Res,2009,12(1):9-13
[13]韩方凯，王铁梅，廖波，等.应用多个因素分析方法曲面体层与CBCT对上颌前部埋伏牙定位的对照研究[J].口腔医学研究,2012,28(9):903-906
[14]刘东旭,王春玲,刘莉，等.颅面部螺旋CT 三维线距测量的准确性评价[J][J].上海口腔医学,2006,15(5):517-520
[15]吴豪阳，霍蓓蓓，吴东.CBCT三维成像在口腔种植术中的临床应用[J].2011，16（2）:125－127
[16]胡露露，宋锦璘，邓锋，等.锥形束CT对微螺钉植入后牙区安全区域的分析[J].华西口腔医学杂志,2012,30(2):156-160
[17]Bu Ling-xue,Wang Ke,Chen Xin,et al.Anatomic structure of the mandibular canal中国组织工程研究与临床康复，2011,15（2）:377-380
[18]陆胜男，张玉宁，陈文静.CBCT技术在埋伏牙诊治中的应用进展[J].口腔医学,2013,33(3):192-