机用ProTaper两步法预备根管的器械折断情况的体外研究

›› 2015, Vol. 35 ›› Issue (2): 132-134.

机用ProTaper两步法预备根管的器械折断情况的体外研究

王胜华¹,许礼华²,宋卫健¹,陆惠娟¹

1. 苏州口腔医院
2. 苏州大学

收稿日期:2013-09-11 修回日期:2014-01-07 出版日期:2015-02-28 发布日期:2015-03-03
通讯作者: 王胜华 E-mail:ww995016@126.com

The instrument fracture of rotary ProTaper files in root canal preparation: in vitro study

Received:2013-09-11 Revised:2014-01-07 Online:2015-02-28 Published:2015-03-03
Contact: Sheng-Hua WANG E-mail:ww995016@126.com

摘要/Abstract

摘要： 【摘要】目的评价分析机用镍钛器械在两步预备根管时的器械折断情况。方法采集600颗离体磨牙,分成对照组与实验组，各300颗,对照组用常规机用ProTaper一步预备到位(S1-Sx-S2-F1-F2),实验组分两步预备根管(第一次:S1-G Grill-S2;第二次:F1-F2),最后统计分析每组器械折断情况,使用SPSS18.0软件包对结果进行卡方检验。结果 2种方法预备根管过程中发生器械折断率和器械折断长度显著性差异（p<0.05），但在不同根管长度里预备器械折断率实验组虽然比对照组少但差别无统计意义，下颌磨牙器械折断36个(76.6%) 较上颌磨牙多, 且上下颌磨牙多发生在近中根管；器械折断的位置多位于根管弯曲的中段28个(59.6%);器械折断多发生于弯曲度大于30°的复杂根管41个(87.2%),两组之间无统计学差异。结论根管治疗中机用Protaper使用两步法预备可以降低器械折断率。

关键词: 机用 ProTaper, 器械折断, 根管预备

Abstract: Abstract: Objective To evaluate the nickel titanium instruments fracture using two steps in root canal preparation. Method: Six hundred anterior teeth were selected. The teeth were divided into two groups, and there were 300 teeth in each group. One step group (control group), which prepared the root canal only once by ProTaper nickel—titanium files (S1-Sx-S2-F1-F2), and another group (experimental group) which prepared the root canal twice (First time:S1-G Grill-S2;Second time:F1-F2). The data were analyzed by SPSS18.0 software package for chi square test. Results: The incidence of instruments fracture and the length of instrument fracture part showed significant differences (p<0.05) between two groups. There were no significant differences in the length of root canal (P > 0.05) between two groups though the incidence of the experimental group instrument fracture was lower than that of control group. The majority of the instruments fracture frequently occurred in mandibular molars, in which there were 36(76.6%)fractures, especially in mesial root canals; and there were 28(59.6%)fractures in the midpoint of the curvature and 41 (87.2%) in quite complex canals with curvature more than 30。.Conclusion: Two steps preparation used in root canal therapy could decrease the incidence of instruments fracture. It is a recommended method to do two steps preparation combining with clinical practice.

Key words: ProTaper nickel- titanium rotary instruments , Instruments fracture, Root canal preparation

中图分类号:

R781.05

王胜华许礼华宋卫健陆惠娟. 机用ProTaper两步法预备根管的器械折断情况的体外研究[J]. 口腔医学, 2015, 35(2): 132-134.

参考文献

[1]胡晓莉,凌均棨,陈罕,等.两种镍钛机动器械预备根管的效果分析[J].中华口腔医学杂志,2005,40(1):30-33
[2]徐琼,樊明文,范兵，等.机用镍钛器械预备弯曲根管的临床应[J].华西口腔医学杂志,2005,23(4):286-288
[3]Calt S,Serper A.Time-dependent effects of EDTA on dentin structures[J].J Endod,2002,28(1):17-19
[4]Angker L,Swain MV,Kilpatrick N.Characterising the micro-mechanical behaviour of the carious dentine of primary teeth using nano-indentation[J].J Biomech,2005,38(7):1535-
[5]闫文娟.机用和手用ProTaper预备中度弯曲根管后的器械损伤情况评价[J].牙体牙髓牙周病学杂志,2012,22(7):386-390
[6]付梅,侯本祥,张志苓.根管弯曲度和器械分离位置对分离器械取出的影响[J].华西口腔医学杂志,2010,28(6):607-610
[7]Peters OA，Peters CI，Schonenberger K,et e1.ProTaper rotary root canal preparation：Assessment of torque and force in relation to canal anatomy[J].Int Endod J,2003,36(2):93-99
[8]Ullmann CJ，Peters OA.Effects of cyclic fatigue on static fracture loads in ProTaper nickel-titanium rotary instrument[J].J Endod,2005,31(3):183-186
[9]付梅,侯本祥,张志苓.根管弯曲度和器械分离位置对分离器械取出的影响[J].华西口腔医学杂志,2010,28(6):607-610
[10]Plotino G，Grande NM，Cordaro M，et a1.Influence of the shape of artificial canals on the fatigue resistance of NiTi rotary instruments[J].Int Endod J,2010,43(1):69-75
[11]Sattapan B，Nervo G，Palamara J，et a1.Defects in rotary nickel-titanium files after clinical use [J][J].J Endod,2000,26(3):161-165
[12]. Hulsmann M ．Schinke|I．Influence of several factors on the success or failure of removal of fractured instruments from the root cana1[J]．Endod Dent Tmumato1．1999,l5（6）：252-258
[13]Petersl OA，Peters CI，Scho nenberger KC，et a1.ProTaper rotary root canal preparation：assessment of torque and force in relation to canal anatomy[J].Int Endod J,2003,36(2):93-
[14]. Inan U，Aydin C，Tunca YM．Cyclic fatigue of ProTaper rotary nickel-titanium instruments in artificial canals with 2 different radii of curvature[J]．Oral Surg Oral Med Oral Pathol Oral Radiol Endod．2007,104(6)：837—840
[15]Elio Berutii.Alfonso Roberto Negro Influence of Manual Preparing and Torque On the Failure Rate of ProTaper Rotary,instruments[J].J Endod,2004,30(4):228-230
[16]Yared GM，Bou Dagher FE，Machtou P.Failure of profile instruments used with high and low torque motors[J].Int Endod J,2001,34(6):471-
[17]Haikel Y，Serfaty R，Bateman G,et a1.Dynamic cyclic fatigue of engine-driven rotary nickel-titanium endodontic instruments[J].J Endod,1999,25(6):434-440
[18]Inan U，Aydin C，Tunca YM.Cyclic fatigue of protaper rotarynickel—titanium instruments in artificial canals with 2 different radii of curvature[J].Oral surgery，oral medicine，oral pathology，oral radiology，and endodontics,2007,104(6):837-