基于三维CT重建的快速成型技术在下颌骨重建的临床应用

›› 2015, Vol. 35 ›› Issue (9): 776-779.

基于三维CT重建的快速成型技术在下颌骨重建的临床应用

桑炜荣¹,刘雁鸣²,严奉国²

1. 绍兴县中心医院
2. 浙江大学医学院附属第二医院

收稿日期:2014-05-06 修回日期:2014-08-01 出版日期:2015-09-28 发布日期:2015-09-14
通讯作者: 刘雁鸣 E-mail:liuyanming@zju.edu.cn

Application of Three-dimensional CT-based rapid prototyping technique in clinical mandibular reconstruction

Received:2014-05-06 Revised:2014-08-01 Online:2015-09-28 Published:2015-09-14

摘要/Abstract

摘要： 目的评价基于三维CT重建的快速成型技术在下颌骨重建中的作用。方法本组选取7例下颌骨病变病例，术前均采用基于三维CT重建的快速成型技术，制作下颌骨实体模型，并在实体模型上设计下颌骨切骨范围和拟用髂骨瓣或腓骨瓣的骨量和形态。术中按拟定方案切除下颌骨病变，并同期以钛板、血管化游离腓骨瓣或髂骨瓣修复下颌骨缺损，术后定期观察随访。结果采用游离髂骨瓣移植修复者3例，游离腓骨瓣移植者3例，单纯以重建钛板固定者1例。移植骨块均顺利成活。已随访6个月~2年。下颌骨形态和面型基本对称，无下颌偏颌。余留牙咬合关系同术前，张口度正常，咀嚼和语音功能恢复良好。结论基于三维CT重建的快速成型技术为下颌骨缺损的个体化和功能性修复提供良好桥梁。

关键词: 下颌骨, 三维CT, 快速成型, 重建

Abstract: Objective To evaluate the effects of the three-dimensional (3D) CT-based rapid prototyping technique on clinical mandibular reconstruction.Methods Seven patients suffering from mandibular lesion were selected,and surgery was designed preoperatively on the 3-D model which was created by using the rapid prototyping technique and based on the 3-D CT scanning data.Guided by the preoperative design,the mandibular lesion was excised and the following bone defect was immediately reconstructed with a vascularized iliac osteomyocutaneous flap or a vascularized fibular flap,or just a simple reconstructive titanium plate.The patients were then followed up regularly.Results The mandibular defect was reconstructed with the vascularized iliac flap in three patients,with the vascularized fibular flap in three patients and with a simple titanium plate in one patient.The patients had been followed up for 6-24 months.The contour of the reconstructed mandible was symmetrical in all patients.No malocclusion or limitation of mouth opening was found.The postoperative functions of mastication and speech were satisfactory in all patients.Conclusions Reconstruction of mandibular defect can benefit from the application of the 3D CT-based rapid prototyping technique.

Key words: mandibular bones, three-dimensional CT, rapid prototyping, reconstruction

中图分类号:

R782.2

桑炜荣刘雁鸣严奉国. 基于三维CT重建的快速成型技术在下颌骨重建的临床应用[J]. 口腔医学, 2015, 35(9): 776-779.

参考文献

[1]Van Gemert JT,Van Es RJ,Rosenberg AJ,et al.Free vascularized flaps for reconstruction of the mandible: complications,success,and dental rehabilitation[J].J Oral Maxillofac Surg,2012,70(7):1692-1698
[2]Bak M,Jacobson AS,Buchbinder D,et al.Contemporary reconstruction of the mandible[J].Oral Oncol,2010,46(2):71-6
[3]Cordeiro PG,Disa JJ，Hidalgo DA，et al.Reconstruction of the mandible with osseous free flap：a 10-1999 experience with 150 consecutive patients[J].Plast Reconstr Surg,1999,104(5):1314-1320
[4]Laure B,Sury F,Martin T,et al.Reconstruction of bony mandibular and maxillary defects with one single transfer of a free fibula osteocutaneous flap[J].J Plast Reconstr Aesthet Surg,2008,61(2):200-203
[5]Massimo Politi,Corrado Toro.Iliac flap versus fibula flap in mandibular reconstruction[J].J Craniofac Surg,2012,23(3):774-779
[6] 米罗若.Peterson口腔颌面外科学[M].蔡志刚,译.北京：人民卫生出版社,2011:761-763
[7]Katsuragi Y,Kayano S,Akazawa S,et al.Mandible reconstruction using the calcium-sulphate three-dimensional model and rubber stick: a new method,'mould technique',for more accurate,efficient and simplified fabrication[J].J Plast Reconstr Aesthet Surg,2011,64(5):614-622
[8]Juergens P，Krol Z，Zeilhofer HF，et a1.Computer simulation and rapid prototyping for the reconstruction of the mandible[J].J Oral Maxillofac Surg,2009,67(10):2167-2170
[9]Farifia R,Plaza C，Martinovic G.New transference technique of position of mandibular reconstructing plates using stereolithographie models[J].J Oral Maxillofac Surg,2009,67(11):2544-2548
[10]Leiggener C,Messo E,Thor A,et al.A selective laser sintering guide for transferring avirtual plan to real time surgery in composite mandibular reconstruction with free fibula osseous flaps[J].Int J Oral Maxillofac Surg,2009,38(2):187-192
[11]. Juergens P,Krol Z,Zeilhofer HF，et al．Computer Simulation and Rapid Prototyping for the Reconstruction of the Mandible[J]．J Oral Maxillofac Surg,200967(10)：2167-2170
[12]Abou-ElFetouh A,Barakat A,Abdel-Ghany K.. Computer-guided rapid-prototyped templates for segmental mandibular osteotomies: a preliminary report[J].Int J Med Robot,2011,7(2):187-92
[13]王光君.影像技术在颌面部病变诊治中的对比分析[J].口腔医学,2011,31(2):126-
[14] 张志愿.口腔颌面外科学[M].7版.北京：人民卫生出版社，2012：356-425
[15]段青云,贾暮云.颌骨病变的主要影像学检查方法[J]..口腔医学,2013,33(2):135-
[16] 侯伟东,谢小青,等.预构骨皮瓣的实验研究.[J].南昌大学学报（医学版）.2010,50(12):63
[17]邱蔚六.口腔颌面部缺损修复重建的现状和展望[J].中国修复重建外科杂志,2005,19(10):769-772
[18]Zhou L,Shang H,He L,et al.Accurate Reconstruction of Discontinuous Mandible Using a Reverse Engineering/Computer-Aided Design/Rapid Prototyping Technique: A Preliminary Clinical Study[J].J Oral Maxillofac Surg,2010,68(9):2115-2121
[19]Hirsch DL,Garfein ES,Christensen AM,et al.Use of Computer-aided design and computer-aided manufacturing to produce orthognathically ideal surgical outcomes: a paradigm shift in head and neck reconstruction[J].J Oral Maxillofac Surg,2009,67(10):2115-2122