CAD/CAM复合陶瓷材料表面处理的研究进展

›› 2019, Vol. 39 ›› Issue (11): 1053-1056.

• 综述 • 上一篇

CAD/CAM复合陶瓷材料表面处理的研究进展

熊成立¹,郝爽¹,李娴静¹,王景云²

1. 吉林大学口腔医院
2. 吉林大学口腔医院VIP综合科

收稿日期:2018-12-29 修回日期:2019-03-08 出版日期:2019-11-28 发布日期:2019-12-04
通讯作者: 王景云 E-mail:jlccjingyun@sina.com

Research progress on surface treatment of CAD/CAM composite ceramic materials

Received:2018-12-29 Revised:2019-03-08 Online:2019-11-28 Published:2019-12-04
Contact: Jingyun N/AWang E-mail:jlccjingyun@sina.com

摘要/Abstract

摘要： 随着CAD/CAM技术的不断发展，越来越多的CAD/CAM复合陶瓷材料被应用于口腔修复学，其远期修复效果很大程度取决于修复体的粘接强度，其中影响修复体与牙体粘接强度的主要因素就是修复体的表面处理，该文就CAD/CAM材料的表面处理的研究进展作一综述。

关键词: CAD/CAM陶瓷, 表面处理, 粘接强度

Abstract: With the continuous development of CAD/CAM technology, more and more CAD/CAM composite ceramic materials are applied to oral prosthetics, whose long-term repair effect depends largely on the bond strength of the prosthesis. The main factor that influences the bond strength between porcelain restoration and tooth is the surface treatment of the restoration. This paper reviews the research progress of surface treatment of CAD/CAM composite ceramic materials.

Key words: CAD/CAM ceramics, surface treatments, bonding strength

中图分类号:

R783.1

熊成立郝爽李娴静王景云. CAD/CAM复合陶瓷材料表面处理的研究进展[J]. , 2019, 39(11): 1053-1056.

参考文献 26

[1]	Mainjot AK, Dupont NM, Oudkerk JC, Dewael TY, Sadoun MJ.From Artisanal to CAD-CAM Blocks: State of the Art of Indirect Composites.[J].Journal of Dental Research, 2016, 95(5):487-495
[2]	[2 Mainjot AK, Dupont NM, Oudkerk JC, Dewael TY, Sadoun MJ.From Artisanal to CAD-CAM Blocks: State of the Art of Indirect Composites.[J].Journal of Dental Research, 2016, 95(5):487-495
[3]	Alvaro Della Bona, Audrea D. Nogueira, Oscar E,Pecho..Optical properties of CAD–CAM ceramic systems.[J].Journal of Dentistry, 2014, 42(9):1202-1209
[4]	Ruse ND, Sadoun MJ. Resin-composite blocks for dental CAD/CAM applications.[J].J Dent Res , 2014, 93(12):1232-1234
[5]	Matinlinna JP，Vallittu PK.Bonding of resin composites to etchable ceramic surface -an insight review of the chemical aspects on surface conditioning[J].J Oral Rehabil, 2007, 34(8):622-630
[6]	D.Sundfeld Neto,L.Naves,A.R.Costa,A.B.Correr,S.Consani,G.A.Borges,et al..Bonding of resin composites to etchable ceramic surface -an insight review of the chemical aspects on surface conditioning[J].Oper Dent , 2015, 40(47):470-479
[7]	Volkel T, Braziulis E.Monobond Etch & Prime[J]. Scientific Documentation , 2015, :-
[8]	Fabián Murillo-Gómez, Regina Guenka Palma-Dibb, Mario Fernando De Goes.Effect of acid etching on tridimensional microstructure of etchable CAD/CAM materials.[J].Dental Materials, 2018, 34(6):944-955
[9]	B.Yang,S.Wolfart,M.Scharnberg,K.Ludwig,R.Adelung,M.Kern..Influence of contamination on zirconia ceramic bonding.[J].J Dent Res, 2007, 86(8):749-753
[10]	Kumiko Yoshihara, Noriyuki Nagaoka, Yukinori Maruo, Goro Nishigawa, Masao Irie, Yasuhiro Yoshida, Bart Van Meerbeek.Sandblasting may damage the surface of composite CAD–CAM blocks.[J].Dental Materials35, 2007, 33(3):124-135
[11]	Tek?e, N.,Tuncer,S.,Demirci, M.,Kara,D.and Baydemir, C..Microtensile Bond Strength of CAD/CAM Resin Blocks to Dual-Cure Adhesive Cement: The Effect of Different Sandblasting Procedures.[J].official journal of the American College of Prosthodontists???, 2018, :-
[12]	Strasser, Thomas; Preis, Verena; Behr, Michael, et al.Roughness, surface energy, and superficial damages of CAD/CAM materials after surface treatment.[J].Clin Oral Invest, 2018, 22(8):2787-2797
[13]	Yoshihara K, Nagaoka N, Maruo Y, Nishigawa G, Irie M, Yoshida Y, van Meerbeek B.Sandblasting may damage the surface of composite CAD-CAM blocks. [J].Dent Mater , 2017, 33(3):124-135
[14]	Della Bona A，Donassollo TA，Demarco FF，et al.Characterization and surface treatment effects on topography of a glass -infiltrated alumina/zirconia-reinforced ceramic [J]. [J].Dent Mater, 2007, 23(6):769-775
[15]	Kern M，Thompson VP.Sandblasting and silica coating of a glass-infiltrated alumina ceramic：Volume loss，morphology，and changes in the surface composition[J]. [J].J Prosthet Dent , 1994, 71(5):453-461
[16]	Tekce, N, Tuncer, S, Demirci, M.Microtensile Bond Strength of CAD/CAM Resin Blocks to Dual-Cure Adhesive Cement: The Effect of Different Sandblasting Procedures.[J].JOURNAL OF ADVANCED PROSTHODONTICS, 2018, 10(3):211-217
[17]	Ali, Alghamdi，Takagaki, Tomohiro, et al.Influence of Ambient Air and Different Surface Treatments on the Bonding Performance of a CAD/CAM Composite Block.[J].J Adhes Dent 2018 20 (4):317-324, 2018, 20(4):317-324
[18]	Higashi M, Matsumoto M, Kawaguchi A, et al.Bonding effectiveness of self‐adhesive and conventional‐type adhesive resin cements to CAD/CAM resin blocks.Part 1: Effects of sandblasting and silanization. [J].Dent Mater , 2016, 35(1):21-28
[19]	K?mürcüo?lu MB, Sa??rkaya E, Tulga A.Influence of different surface treatments on bond strength of novel CAD/CAM restorative materials to resin cement.[J].J Adv Prosthodont, 2017, 9(6):439-446
[20]	Higashi M, Matsumoto M, Kawaguchi A, et al.Bonding effectiveness of self‐adhesive and conventional‐type adhesive resin cements to CAD/CAM resin blocks.Part 1: Effects of sandblasting and silanization.[J]. Dent Mater , 2016, 35(1):21-28
[21]	Barutcigil K, Barutcigil ?, Kul E, et?al..Effect of different surface treatments on bond strength of resin cement to a CAD/CAM restorative material.[J]., 2016, :-
[22]	Ural C, Kulunk T, Kulunk S, Kurt M .The effect of laser treatment on bonding between zirconia ceramic surface and resin cement.[J].Acta Odontol Scand, 2010, 68(6):354-359
[23]	Rocca JP, Fornaini C, Brulat N, Seif B, Darque ceretti E .CO2 and Nd:YAP laser interaction with lithium disilicate and zirconia dental ceramics: a preliminary study. [J].Opt Laser Technol , 2014, 57(SI):216-223
[24]	El Gamal A, Rocca JP, Fornaini C, Muhammad O, Medioni E, Cucinotta A, Brulat-Bouchard N .The effect of CO2?and Nd:YAP lasers on CAD/CAM ceramics: SEM, EDS and thermal studies.[J]. Laser Ther , 2016, 25(1):27-34
[25]	Secilmis A, Ustun O, Buyukhatipoglu IK.?Evaluation of the shear bond strength of two resin cements on different CAD/CAM materials.[J].J Adhes Sci Tech, 2016, 30(9):983-993
[26]	Mirzaei M, Yasini E, Tavakoli A, et?al..?Effect of different powers of Er,Cr:YSGG laser treatment on surface morphology of microhybride composite resin: scanning electron microscope (SEM) Evaluation.[J].J Lasers Med Sci?2015;6(2):62‐66, 2015, 6(2):62-66

CAD/CAM复合陶瓷材料表面处理的研究进展

Research progress on surface treatment of CAD/CAM composite ceramic materials

可视化

摘要/Abstract

引用本文

使用本文

参考文献 26

相关文章 15

编辑推荐

Metrics

本文评价

[1]	卢枳岑陈莹谢海峰张怀勤陈晨. 磷酸酯单体PENTA与牙科氧化锆陶瓷结合的化学证据[J]. , 2018, 38(3): 217-221.
[2]	康方芳卢枳岑陈冰卓戴诗琪陈莹杨路谢海峰. 碱性环境下放置的磷酸酯单体对氧化锆陶瓷粘接的作用[J]. , 2018, 38(12): 1068-1073.
[3]	陈玥谢海峰钱梦珂林佳琳陈晨. MDP对氧化锆陶瓷粘接性能的提高及微渗漏评价[J]. , 2017, 37(9): 774-777.
[4]	林佳琳陈莹陈玥章非敏张怀勤谢海峰陈晨. 不同溶剂对MDP提高氧化锆陶瓷粘接性能的影响[J]. , 2017, 37(4): 289-292.
[5]	杨路陈莹卢枳岑张怀勤谢海峰陈晨. 不同类型钛酸酯偶联剂对氧化锆陶瓷与树脂初期粘接强度的影响[J]. , 2017, 37(11): 976-980.
[6]	李振霞薛晶陈婷婷张强. 纳米二氧化钛对正畸粘接剂抗菌性与拉伸粘接强度的影响[J]. , 2016, 36(7): 591-594.
[7]	罗善峰方文杨国利赵士芳. SLA种植体表面干扰LRP5信号影响骨结合的实验研究[J]. , 2016, 36(4): 309-313.
[8]	李敏邱憬. 钛表面微形貌影响成骨细胞行为及其分子机制的研究进展[J]. , 2015, 35(7): 596-600.
[9]	陈莹莹张昕马小青张怀勤. 不同表面处理及老化对氧化锆陶瓷抗折强度的影响[J]. , 2015, 35(5): 359-361.
[10]	崔霖霖杨建荣. 种植体表面处理研究概述[J]. , 2015, 35(2): 150-152.
[11]	陈兰竹谢伟丽孙亚杰郭彬李雅静艾振龙. H2O2溶液表面处理对纤维桩和树脂水门汀粘接强度的影响[J]. , 2015, 35(12): 1032-1035.
[12]	廖楚航田鲲朱琦. 不同人工老化强度对氧化锆陶瓷粘接强度的影响[J]. , 2014, 34(8): 592-596.
[13]	陈建治史月华王磊石玉龙. 处理时间对纯钛表面微弧氧化膜结构和特性的影响[J]. , 2014, 34(4): 270-270.
[14]	陈建珊刘梅谢海峰刘芳章非敏. 玻璃纤维的表面预处理对纤维增韧树脂基桩力学性能的影响[J]. , 2014, 34(12): 897-900.
[15]	汪洁,章非敏. 树脂水门汀添加生物玻璃后在人工唾液中的生物活性研究[J]. , 2012, 32(5): 294-297.