[1] |
Zhang H, Cui JW, Lu XL, et al.Finite element analysis on tooth and periodontal stress under simulated occlusal loads[J].J Oral Rehabil, 2017, 44(7):526-536
|
[2] |
Allen C, Meyer CA, Yoo E, et al.Stress distribution in a tooth treated through minimally invasive access compared to one treated through traditional access: A finite element analysis study[J].J Conserv Dent, 2018, 21(5):505-509
|
[3] |
Yuan K, Niu C, Xie Q, et al.Comparative evaluation of the impact of minimally invasive preparation vsconventional straight-line preparation on tooth biomechanics: a finite element analysis[J].Eur J Oral Sci, 2016, 124(6):591-596
|
[4] |
elik K?ycü B, Imirzalio?lu P, ?zden UA.Three-dimensional finite element analysis of stress distribution in inlay-restored mandibular first molar under simultaneous thermomechanical loads[J].Dent Mater J, 2016, 35(2):180-186
|
[5] |
El-Anwar MI, Yousief SA, Soliman TA, et al.A finite element study on stress distribution of two different attachment designs under implant supported overdenture[J].Saudi Dent J, 2015, 27(4):201-207
|
[6] |
Martinez Choy SE, Lenz J, Schweizerhof K, et al.Realistic kinetic loading of the jaw system during single chewing cycles:a finite element study[J].J Oral Rehabil, 2017, 44(5):375-384
|
[7] |
R?hrle O, Saini H, Ackland DC.Occlusal loading during biting from an experimental and simulation point of view[J].Dent Mater, 2018, 34(1):58-68
|
[8] |
Nakamura T, Imanishi A, Kashima H, et al.Stress analysis of metal-free polymer crowns using the three-dimensional finite element method[J].Int J Prosthodont, 2001, 14(5):401-405
|
[9] |
Benazzi S, Nguyen HN, Kullmer O, et al.Dynamic Modelling of Tooth Deformation Using Occlusal Kinematics and Finite Element Analysis[J].PLoS One, 2016, 11(3):e0152663-
|
[10] |
赵楚翘, 徐一驰, 刘定坤, 等.髓腔固位冠及桩核冠修复下颌第一磨牙大面积缺损的生物力学分析[J].口腔医学研究, 2018, 34(5):513-517
|
[11] |
魏子清, 唐林俊, 沈杰, 等.髓腔固位型高嵌体修复大面积牙体缺损的生物陶瓷及粘接剂适应性研究[J].中国实验诊断学, 2019, 23(6):1041-1045
|
[12] |
Jiang W, Bo H, Yongchun G, et al.Stress distribution in molars restored with inlays or onlays with or without endodontic treatment: A three-dimensional finite element analysis[J].J Prosthet Dent, 2010, 103(1):6-12
|
[13] |
St-Georges AJ, Sturdevant JR, Swift EJ Jr, et al.Fracture resistance of prepared teeth restored with bonded inlay restorations[J].J Prosthet Dent, 2003, 89(6):551-557
|
[14] |
Helal MA, Wang Z.Biomechanical Assessment of Restored Mandibular Molar by Endocrown in Comparison to a Glass Fiber Post-Retained Conventional Crown: 3D Finite Element Analysis[J].J Prosthodont, 2019, 28(9):988-996
|
[15] |
刘涛, 耿海霞, 荣起国, 等.下颌第一磨牙两壁缺损桩核修复后基牙应力的三维有限元分析[J].中华口腔医学杂志, 2015, 50(9):561-564
|
[16] |
D' souza KM, Aras MA.Three-dimensional finite element analysis of the stress distribution pattern in a mandibular first molar tooth restored with five different restorative materials[J].J Indian Prosthodont Soc, 2017, 17(1):53-60
|
[17] |
田力丽, 梁伟, 李凌旻, 等.下颌第一磨牙牙体缺损修复后静力与冲击动力的三维有限元分析[J].华西口腔医学杂志, 2007, 25(6):595-598
|
[18] |
邹英楠, 王屹博, 丁超, 等.动态载荷下牙半切与种植体联合修复的三维有限元分析[J].中国组织工程研究, 2019, 23(2):178-183
|
[19] |
Murakami N, Wakabayashi N.Finite element contact analysis as a critical technique in dental biomechanics: a review[J].J Prosthodont Res, 2014, 58(2):92-101
|
[20] |
Katona TR.A mathematical analysis of the role of friction in occlusal trauma[J].J Prosthet Dent, 2001, 86(6):636-643
|
[21] |
Dejak B, M?otkowski A.D-Finite element analysis of molars restored with endocrowns and posts during masticatory simulation[J].Dent Mater, 2013, 29(12):e309-e317
|
[22] |
Dejak B, M?otkowski A.A comparison of stresses in molar teeth restored with inlays and direct restorations,including polymerization shrinkage of composite resin and tooth loading during mastication[J].Dent Mater, 2015, 31(3):e77-e87
|
[23] |
Brune A, Stiesch M, Eisenburger M, et al.The effect of different occlusal contact situations on peri-implant bone stress-A contact finite element analysis of indirect axial loading[J].Mater Sci Eng C Mater Biol Appl, 2019, 99:367-373
|
[24] |
Rand A, Stiesch M, Eisenburger M, et al.The effect of direct and indirect force transmission on peri-implant bone stress-a contact finite element analysis[J].Comput Methods Biomech Biomed Engin, 2017, 20(10):1132-1139
|
[25] |
翟晓阳, 张静亚, 张三柯, 等.两种边缘设计的髓腔固位冠修复不同缺损下颌第一磨牙的有限元分析[J].华西口腔医学杂志, 2019, 37(5):480-484
|
[26] |
汪饶饶, 徐远志, 杨启祥, 等.全瓷冠粘接界面缺陷对修复体应力的影响[J].医用生物力学, 2019, 34(4):365-371
|
[27] |
Chai H.On crack growth in molar teeth from contact on the inclined occlusal surface[J].J Mech Behav Biomed Mater, 2015, 44:76-84
|
[28] |
Yoon HG, Oh HK, Lee DY, et al.3-D finite element analysis of the effects of post location and loading location on stress distribution in root canals of the mandibular 1st molar[J].J Appl Oral Sci, 2018, 26:e20160406-
|
[29] |
Wandscher VF, Bergoli CD, de Oliveira AF, et al.Fatigue surviving, fracture resistance, shear stress and finite element analysis of glass fiber posts with different diameters[J].J Mech Behav Biomed Mater, 2015, 43:69-77
|
[30] |
Katona TR, Eckert GJ.The mechanics of dental occlusion and disclusion[J].Clin Biomech (Bristol, Avon), 2017, 50:84-91
|
[31] |
Chang Y, Tambe AA, Maeda Y, et al.Finite element analysis of dental implants with validation:to what extent can we expect the model to predict biological phenomena?A literature review and proposal for classification of a validation process[J].Int J Implant Dent, 2018, 4(1):7-
|