[1]吴荫顺,方智.腐蚀实验方法与防腐蚀检测技术[M].北京:化学工业出版社,1996:2-4.[2]毛英杰.牙科金属在口腔环境中电化学腐蚀的研究进展[J].国外医学:生物医学工程分册,2005,28(2):128-[3]褚凤清.牙科金属与合金腐蚀研究方法的进展[J].国际口腔医学杂志,2010,7(2):189-195[4]Schiff N,Grosgogeat B.Influence of fluoride content and pH on the corrosion resistance of titanium and its alloys[J].Biomaterials,2002,23(5):1995-2002[5]宋应亮,徐君伍,马轩祥.Aay4对钛及钛75合金表面失泽腐蚀的研究[J].中华口腔医学杂志,2000,35(4):256-258[6]宋应亮,徐君伍.口腔环境中钛及钛合金腐蚀研究现状[J].国外医学:生物医学工程分册,2000,23(4):243-245[7]佟宇,郭天文,张惠,等.含氟牙膏对纯钛表面形态、光泽和色彩的影响[J].中国美容医学,2006,15(6):708-710[8]Lim YJ,Oshida Y,Andres CJ,et al.Surface characterizations of variously treated titanium materials[J].Int J Oral maxilloface implants,2001,16(3):333-342[9]李刚.牙膏摩擦剂对牙齿磨损和清洁效果的影响及研究进展[J].牙体牙髓牙周病学杂志,2003,13(8):465-468[10]Wataha JC,Lockwood PE,Mettenburg D,et al.Toothbrushing causes elemental release from dental casting alloys over extended intervals[J].Biomed Mater Res B Appl Biomater,2003,65(1):180-185[11]Milo〖AKsˇD〗ev I,Kapun B,Selih VS.The effect of fluoride ions on the corrosion behaviour of Ti metal,and Ti6Al7Nb and Ti6Al4V alloys in artificial saliva[J].Acta Chim Slov,2013,60(3):543-555[12]Nakagawa M,Matsuya S,Udoh K,et al.Corrosion behavior of pure titanium and titanium alloys in fluoridecontaining solutions[J].Dent Mater,2001,20(4):305-314[13]Reclaru L,Meyer JM.Zonal coulometric analysis of the corrosion resistance of dental alloys[J].J Denl,1995,23(5):301-303[14]盛江筠,刘正.含氟牙膏刷牙后菌斑和唾液中氟离子浓度的变化[J].口腔医学纵横杂志,2001,17(1):31-33[15]Duffo GS,Farina SB.Corrosion behaviour of a dental alloy in some beverages and drinks[J].Mater Chem Phys,2009,115(1):235-238[16]曾博玮,陈蕾.氟离子对2种牙科用钛合金耐腐蚀性的影响[J].华西口腔医学杂志,2010,28(3):261-264[17]刘丽,毛英杰,陈志红.钛合金在不同pH值人工唾液中耐腐蚀性能的研究[J].中国生物医学工程学报,2006,25(2):165-169 |