3D打印临时冠在后牙游离缺失种植修复中的应用

doi:10.13591/j.cnki.kqyx.2022.02.007

口腔医学 ›› 2022, Vol. 42 ›› Issue (2): 136-139.doi: 10.13591/j.cnki.kqyx.2022.02.007

3D打印临时冠在后牙游离缺失种植修复中的应用

卿萍, 吴蓉

成都市第三人民医院·西南交通大学附属医院口腔科,四川成都(610000)

修回日期:2021-07-09 出版日期:2022-02-28 发布日期:2022-02-25
通讯作者: 吴蓉 Tel:(028)61312197 E-mail:2782060606@qq.com
基金资助:
成都市卫生健康委员会资助课题(2019072)

Clinical application of 3D printing temporary crown for implant-assisted restoration in posterior area with free loss

QING Ping, WU Rong

Department of Stomatology, The Third People's Hospital of Chengdu, The Affiliated Hospital of Southwest Jiaotong University, Chengdu 610000, China

Revised:2021-07-09 Online:2022-02-28 Published:2022-02-25

摘要/Abstract

摘要： 目的观察3D打印临时冠在后牙连续缺失种植修复中的临床应用效果。方法选择2019—2020年在我院就诊的双侧后牙游离缺失患者共50例,植入同一种植体系统,种植修复时,患者随机分为2组,每组25例,分别为对照组及试验组。对照组为直接完成组,根据印模及咬合硅橡胶完成最终修复体制作。试验组为临时冠组,采用3D打印先制作临时冠,再根据临时冠试戴情况调整后制作最终修复体。最终修复体完成后,比较两组修复体试戴总花费时间,精确度以及患者满意度。结果试验组试戴花费总时间比对照组短(P<0.05),修复体精确度更高(P<0.05),患者满意度高(P<0.05),差异具有统计学意义。结论对后牙连续缺失种植病人进行修复时,临时冠具有一定的应用价值。

关键词: 3D打印技术, 临时冠, 多牙缺失, 种植修复

Abstract: Objective To investigate the clinical outcome of 3D printing temporary crown for dental implant restoration in the posterior region. Methods Fifty patients with continuous tooth missing in posterior teeth area were selected and divided into two groups. All patients selected the same implant system. In the control group, the final restoration was directly completed according to the impression. In the experimental group, 3D printing temporary crown was used and adjusted according to clinical performance before final restoration. After the prosthodontics was fixed, chair-side time, the accuracy of final restoration and patients’ satisfaction were evaluated and analyzed. Results The chairside time of experimental group was significantly less than the control group (P<0.05). Moreover, the accuracy of restoration and satisfaction of patient in the experimental group were also higher than those in the control group (P<0.05). Differences were statistically significant. Conclusion 3D printing temporary crown has certain application value in the continuous missing tooth area, which benefits both doctors and patients.

Key words: 3D printing technology, temporary crown, multiple teeth loss, dental implant restoration

中图分类号:

R783.4

卿萍, 吴蓉. 3D打印临时冠在后牙游离缺失种植修复中的应用[J]. 口腔医学, 2022, 42(2): 136-139.

QING Ping, WU Rong. Clinical application of 3D printing temporary crown for implant-assisted restoration in posterior area with free loss[J]. Stomatology, 2022, 42(2): 136-139.

参考文献

[1] Akalin ZF, Ozkan YK, Ekerim A. Effects of implant angulation, impression material, and variation in arch curvature width on implant transfer model accuracy[J]. Int J Oral Maxillofac Implants, 2013, 28(1):149-157.
[2] van Velzen FJ, Ofec R, Schulten EA, et al. 10-year survival rate and the incidence of peri-implant disease of 374 titanium dental implants with a SLA surface:A prospective cohort study in 177 fully and partially edentulous patients[J]. Clin Oral Implants Res, 2015, 26(10):1121-1128.
[3] Larsson C, Wennerberg A. The clinical success of zirconia-based crowns:A systematic review[J]. Int J Prosthodont, 2014, 27(1):33-43.
[4] 夏雨凝, 马楚凡, 陈吉华. 3D打印技术在口腔修复中的运用[J]. 解放军医药杂志, 2018, 30(6):33-37.
[5] 冯远华, 罗翠芬. 影响种植牙取模精确度的研究进展[J]. 中国口腔种植学杂志, 2020, 25(2):95-100.
[6] Martínez-Rus F, García C, Santamaría A, et al. Accuracy of definitive casts using 4 implant-level impression techniques in a scenario of multi-implant system with different implant angulations and subgingival alignment levels[J]. Implant Dent, 2013, 22(3):268-276.
[7] 满毅. 口腔种植的精准二期手术和取模技巧:如何避免模型的毫米级误差 reasons for millimeter deviation[M]. 北京:人民卫生出版社, 2020:160-175.
[8] Moreira AH, Rodrigues NF, Pinho AC, et al. Accuracy compar-ison of implant impression techniques:A systematic review[J]. Clin Implant Dent Relat Res, 2015, 17(Suppl 2):e751-e764.
[9] 陈昕, 任洪芋, 张永清. 国产3B自锁托槽、3B直丝弓托槽和Damon Q自锁托槽椅旁操作时间的对比研究[J]. 口腔材料器械杂志, 2015, 24(2):110-112.
[10] 马克强, 张凌, 周唯, 等. 前牙全瓷单冠修复患者的个人因素对其治疗满意度的影响[J]. 临床口腔医学杂志, 2013, 29(1):39-41.
[11] Flügge T, van der Meer WJ, Gonzalez BG, et al. The accuracy of different dental impression techniques for implant-supported dental prostheses:A systematic review and meta-analysis[J]. Clin Oral Implants Res, 2018, 29(Suppl 16):374-392.
[12] Menini M, Setti P, Pera F, et al. Accuracy of multi-unit implant impression:Traditional techniques versus a digital procedure[J]. Clin Oral Investig, 2018, 22(3):1253-1262.
[13] 黄平, 商红国. 数字化种植导板在下颌后牙区连续多牙缺失下的临床应用[J]. 山东大学学报(医学版), 2020, 58(2):60-63.
[14] 张翌婕, 史俊宇, 赖红昌. 数字化印模在口腔种植修复中的研究进展[J]. 中国口腔颌面外科杂志, 2020, 18(5):469-473.
[15] 黄若萱, 黄宝鑫, 武诗语, 等. 口内数字化印模技术在口腔种植中的应用现状与研究进展[J]. 口腔医学, 2019, 39(6):539-543.
[16] 张尚伟, 吴惠玲. 全氧化锆桥体修复对后牙缺失患者的应用效果分析[J]. 中国医药科学, 2016, 6(18):207-209.
[17] 黄娜, 吕杰, 李平, 等. 两种印模方法在种植固定卵圆形桥体修复中的效果比较[J]. 广东牙病防治, 2015, 23(8):421-426.
[18] 杨贝贝, 安虹, 张建国. 固定桥不同桥体龈端形态修复下颌第一磨牙的三维有限元分析[J]. 口腔医学, 2021, 41(1):27-31.
[19] 许月丹, 金鑫阳, 赵维家, 等. 种植义齿的咬合设计[J]. 口腔医学, 2020, 40(12):1124-1128.
[20] Khorsandi D, Fahimipour A, Abasian P, et al. 3D and 4D printing in dentistry and maxillofacial surgery:Printing techniques, materials, and applications[J]. Acta Biomater, 2021, 122:26-49.

3D打印临时冠在后牙游离缺失种植修复中的应用

Clinical application of 3D printing temporary crown for implant-assisted restoration in posterior area with free loss

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 14

编辑推荐

Metrics

本文评价

[1]	付馨靓, 王浩, 甘雪琦. ICam4D摄影测量技术在无牙颌种植固定修复中的应用1例并文献回顾[J]. 口腔医学, 2022, 42(1): 72-78.
[2]	王萍, 汤春波. 外胚层发育不全患者的口腔修复治疗[J]. 口腔医学, 2022, 42(1): 84-86.
[3]	李振孟翔峰温波. 临时冠塑形对前牙种植美学的临床观察[J]. , 2021, 41(2): 128-132.
[4]	谢明杰李潇. 影响3D打印的口腔修复体精密度的因素[J]. , 2018, 38(9): 860-864.
[5]	孙树文白莲. 牙隐裂保存治疗临床探讨[J]. , 2017, 37(1): 69-71.
[6]	丁晓军邱憬汤春波. 自主研发CAD/CAM种植导板制作系统在无牙颌种植修复中的临床应用研究[J]. , 2016, 36(5): 421-424.
[7]	宁晔吴海珍胡芳芳陆钰康林王群. 美学区单牙即刻种植即刻诱导牙龈成形的临床观察[J]. , 2016, 36(4): 361-365.
[8]	徐欣. 当代口腔种植修复技术新进展[J]. , 2015, 35(4): 241-244.
[9]	李　俊,黄隆龙. 应力缓压式种植修复体的临床应用研究[J]. , 2012, 32(3): 148-150,153.
[10]	林培,郑定国. 3种修复方式修复游离端缺失的临床比较[J]. , 2012, 32(10): 609-612.
[11]	童信生. 松风SWIFT-TEMP临时冠桥材料在固定修复中的应用[J]. , 2004, 24(3): 165-.
[12]	轩东英,杜岩,赵铱民,程静涛. 颌面缺损的种植修复[J]. , 2000, 20(3): 165-166.
[13]	汪波,郭建青. 临时冠桥在金属烤瓷牙修复中的应用[J]. , 1998, 18(2): 90-.
[14]	蒋晓蓉；华之成；姜俭；尚光伟；钱桂芳；周宏宝. 光敏复合树脂即刻修复种植体临时冠的初步探讨[J]. , 1997, 17(1): 29-30.