种植磁性覆盖义齿的三维有限元模型的建立

Abstract

Abstract: Objective To construct a threedimensional finite element model of implantretained overdenture with magnetic attachments for analyzing the stress distribution of overdenture with implant magnetic attachments.Methods After using DICOM modeling method based on CT scaning,medical image 3D reconstruction Mimics software,Geomagic studio reverse engineering software and SolidWorks 3D design software the threedimensional finite element model of implant magnetic overdenture was constructed.Results The threedimensional finite element model of implantretained overdenture with magnetic attachments was constructed.〗Conclusions The 3D FEA models of implant magnetic overdenture can be constructed to analyze the stress distribution.

Key words: Magnetic Attachment, Overdenture, Implant, Finite Element, Stress

CLC Number:

R782.4

References

[1] 冯海兰,徐军.口腔修复学[M].北京：北京大学医学出版社，200 [2]Doundoulakis JH,Eckert SE,Lindquist CC,etal.The overdenture as an alternative to the complete mandibular denture[J].Am Nov,2003,134(11):1455-1458 [3]Duyck J,Van Oosterwyck H,Vander Sloten J,etal.Magnitude and distribution of occlusal forces on oral implants supporting fixed prostheses:An in vivo study[J].Clin Oral Implants Res,2000,11(5):465- [4]安晓飞,牛光良,白乐康.不同补偿曲线的上颌全口义齿三维有限元模型的建立[J].口腔颌面修复学杂志,2010,11(3):158-160 [5] Colling EW.The physical metallurgy of titanium alloys.[J].Metals Park (OH): American Society for Metals,1984,:- [6]John J,Rangarajan V,Savadi RC,etal.finite element analysis of stress distribution in the bone,around the implant supporting a mandibular overdenture with ball/o ring and magnetic attachment[J].Indian Prosthodont Soc,2012,12:37-44 [7]Sakaguichi RL,Borgersen SE.Nonlinear contact analysis of preload in dental implant screws[J].Int J Oral Maxillofac Implants,1995,10:295-302 [8]Darbar UR,Huggett R,Harrison A,etal.Finite element analysis of stress distribution at the tooth-denture base interface of acrylic resin teeth debonding from the denture base[J].J Prosthet Dent,1995,74:591-594 [9]Barbier L,Vander Sloten J,Krzesinski G,etal.Finite element analysis of non-axial versus axial loading of oral implants in the mandible of the dog[J].J Oral Rehabil,1998,25:847-858 [10]Bar?o VA,Assun??o WG,Tabata LF,etal.Effect of different mucosa thickness and resiliency on stress distribution of implant- retained overdentures-2D FEA[J].Comput Methods Programs Biomed,2008,92:213-223 [11]Bar?o VA,Delben J,A,Lima J,etal..Comparison of different designs of implant-retained overdentures and ?xed full-arch implant-supported prosthesis on stress distribution in edentulous mandible – A computed tomography-based three- dimensional ?nite element analysis[J].. Journal of Biomechanics,2013,46:1312-1320 [12]Cruz,M,Wassall,T,Toledo,EM.,etal. .Finite element stress analysis of dental prostheses supported by straight and angled implants.[J]...The International Journal of Oral & Maxillofacial Implants,2009,24:391-403 [13]Dong J..Three dimensional finite element analysis of loading influence in mandibular implant overdenture, Doctoral dissertation of Peking University School of Stomatology; 2010.[J].,2010,:- [14]Tabata,LF.,Rocha,EP.,Barao,V.A.,etal..Platform switching:biomechanical evaluation using three-dimensional ?nite element analysis[J]..The International Journal of Oral & Maxillofacial Implants,2011,26:482-491 [15]H J.A. MeijernullJ.H. Kuiper,F.J.M. Starmans,F. Bosman..Stress distribution around dental implants: in?uence on superstructure,length of implants,and height of mandible[J]... Prosthet. Dent,1992,68:96- [16]Jingyin LIU,Shaoxia Pan,Jing Dong..Influence of implant number on the biomechanical behaviour of mandibular implant-retained/supported overdentures: A three-dimensional finite element analysis[J].Journal of dentistry,2012,:- [17]Daas,M,Dubois,G,Bonnet,A.S.,etal..A complete ?nite element model of a mandibular implant-retained overdenture with two implants: comparison between rigid and resilient attachment con?gurations[J].Medical Engineering & Physics,2008,30:218-225 [18]Kohal RJ,Papavasiliou G,Kamposiora P,etal.Three-dimensional computerized stress analysis of commercially pure titanium and yttrium-partially stabilized zirconia implants[J].Int J Prosthodont,2002,15:189-194 [19] 陈新民，赵云凤.口腔生物力学[J].北京：科学出版社,2010,:385-414 [20]Meijer HJA,Starmans FJ,Steen WH,et al.Loading conditions of endosseous implants in an edentulous human mandibleA three-dimensional ?nite element study[J].. J Oral Rehabil,1996,23:757-763 [21]Fuh LJ,Hsu JT,Huang HL,etal.Biomechanical investigation of thread designs and interface conditions of zirconia and titanium dental implants with bone: three-dimensional numeric analysis[J].Int J Oral Maxillofac Implants,2013,28(2):-

Construction of a threedimensional finite element model of implantretained overdentures with magnetic attachments

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	. Research progress of the effects of hyperlipidemia on osseointegration of titanium implants [J]. , 2019, 39(6): 557-560.
[2]	. Clinical application progress of computer-aided design and computer-aided manufacturing of milled framework in implant fixed restorations for edentulous patients [J]. , 2019, 39(5): 455-458.
[3]	. Research progress of improving the success rate of planting for diabetic patients [J]. , 2019, 39(5): 459-463.
[4]	. The effect of clenched bruxism on the stress distribution of peri-implant bone with distal free-end edentulism: A three-dimensional finite element study [J]. , 2019, 39(5): 409-413.
[5]	. Reflection and summary of postoperative complications of implant-supported fixed restoration in edentulous patients [J]. , 2019, 39(5): 385-389.
[6]	. Contrastive study on alveolar ridge preservation: Tooth extraction through dentoalveolar distraction [J]. , 2019, 39(3): 207-209.
[7]	Shui-Yi Shao. Application and error analysis of implant reference method in measurement of posterior teeth region in the panoramic radiograph [J]. , 2019, 39(3): 214-217.
[8]	. Clinical application and experience of modified internal sinus floor elevation and dental implant in maxilary molar area [J]. , 2019, 39(3): 223-227.
[9]	. Clinical comparative study of PRP combined with allograft bone powder and autogenous iliac bone graft in the treatment of maxillofacial bone defect [J]. , 2019, 39(3): 218-222.
[10]	. Neither open flap debridement nor bone grafting when “saucer-like” marginal bone loss amounts to 3 mm below the implant shoulder after 1-year functional loading [J]. , 2019, 39(2): 164-166.
[11]	. Flap surgery is required when “saucer-like” marginal bone loss amounted to 3 mm below implant shoulder after 1-year loading [J]. , 2019, 39(2): 161-163.
[12]	. Progress research on application of platelet-rich fibrin in dental implantology [J]. , 2019, 39(1): 71-76.
[13]	. Advantages of long-term stability of guided bone regeneration augmentation for alveolar bone reconstruction compared with autogenous bone graft [J]. , 2019, 39(1): 60-62.
[14]	. Study on the maximum width of the micro slit based on the microsphere diffusion method [J]. , 2019, 39(1): 6-9.
[15]	. Research progress of animal models of peri-implantitis [J]. , 2018, 38(8): 747-751.