| [1]Van Noort R.The future of dental devices is digital[J].Dent Mater,2012,28(1):3-12[2]Giordano R.Materials for chairside cad/cam–produced restorations[J].J Am Dent Assoc,2006,137:14-[3]Ruse ND,Sadoun MJ.Resin-composite blocks for dental cad/cam applications[J].J Dent Res,2014,93(12):1232-1234[4]Nguyen JF,Ruse D,Phan AC,et al.High-temperature-pressure polymerized resin-infiltrated ceramic networks[J].J Dent Res,2014,93(1):62-67[5]Miyazaki T,Hotta Y,Kunii J,et al.A review of dental cad/cam: current status and future perspectives from 20 2009s of experience[J].Dent Mater J,2009,28(1):44-56[6]Mainjot AK,Dupont NM,Oudkerk JC,et al.From artisanal to cad-cam blocks: state of the art of indirect composites[J].J Dent Res,2016,95(5):487-495[7]Swain MV,Coldea A,Bilkhair A,et al.Interpenetrating network ceramic-resin composite dental restorative materials[J].Dent Mater,2016,32(1):34-42[8]Awada A,Nathanson D.Mechanical properties of resin-ceramic cad/cam restorative materials[J].J Prosthet Dent,2015,114(4):587-593[9]Della Bona A,Corazza PH,Zhang Y.Characterization of a polymer-infiltrated ceramic-network material[J].Dent Mater,2014,30(5):564-569[10]Lawson NC,Bansal R,Burgess JO.Wear,strength,modulus and hardness of cad/cam restorative materials[J].Dent Mater,2016,32(11):e275-e283[11]He LH,Swain M.A novel polymer infiltrated ceramic dental material[J].Dent Mater,2011,27(6):527-534[12] 赵信义,孙皎.口腔材料学[M]. 北京: 人民卫生出版社，2012: 92-93[13]Asmussen E,Peutzfeldt A.Influence of UEDMA,BisGMA and TEGDMA on selected mechanical properties of experimental resin composites[J].Dent Mater,1998,14(1):51-56[14]Béhin P,Stoclet G,Ruse ND,et al.Dynamic mechanical analysis of high pressure polymerized urethane dimethacrylate[J].Dent Mater,2014,30(7):728-734[15]Kim KH,Ong JL,Okuno O.The effect of filler loading and morphology on the mechanical properties of contemporary composites[J].J Prosthet Dent,2002,87(6):642-649[16]Lin-Gibson S,Sung L,Forster AM,et al.Effects of filler type and content on mechanical properties of photopolymerizable composites measured across two-dimensional combinatorial arrays[J].Acta Biomater,2009,5(6):2084-2094[17]Nguyen JF,Migonney V,Ruse ND,et al.Properties of experimental urethane dimethacrylate-based dental resin composite blocks obtained via thermo-polymerization under high pressure[J].Dent Mater,2013,29(5):535-541[18]Phan AC,Tang M,Nguyen JF,et al.High-temperature high-pressure polymerized urethane dimethacrylate—mechanical properties and monomer release[J].Dent Mater,2014,30(3):350-356[19]Nguyen JF,Migonney V,Ruse ND,et al.Resin composite blocks via high-pressure high-temperature polymerization[J].Dent Mater,2012,28(5):529-534[20]Phan AC,Béhin P,Stoclet G,et al.Optimum pressure for the high-pressure polymerization of urethane dimethacrylate[J].Dent Mater,2015,31(4):406-412[21]Bakopoulou A,Papadopoulos T,Garefis P.Molecular toxicology of substances released from resin–based dental restorative materials[J].Int J Mol Sci,2009,10(9):3861-3899[22]Tang M,Nguyen JF,Sadoun M,et al.HPLC analysis of monomer release from conventionally and high temperature high-pressure polymerised urethane dimethacrylate intended for biomedical applications[J].J Chrom Separ Tech,2014,5(3):1-[23]铃木陵,石四箴.口腔材料中的环境激素 BPA[J].现代口腔医学杂志,2004,18(4):364-365[24]Gupta SK,Saxena P,Pant VA,et al.Release and toxicity of dental resin composite[J].Toxicol Int,2012,19(3):225-[25]Sideridou I,Tserki V,Papanastasiou G.Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins[J].. Biomaterials,2002,23(8):1819-[26]Tassin M,Bonte E,Loison-Robert LS,et al.Effects of high-temperature-pressure polymerized resin-infiltrated ceramic networks on oral stem cells[J].PLoS One,2016,11(5):e0155450-[27]Grenade C,De Pauw-Gillet MC,Gailly P,et al.Biocompatibility of polymer-infiltrated-ceramic-network (PICN) materials with human gingival fibroblasts (HGFs)[J].Dent Mater,2016,32(9):1152-1164[28]Grenade C,De Pauw-Gillet MC,Pirard C,et al.Biocompatibility of polymer-infiltrated-ceramic-network (PICN) materials with human gingival keratinocytes (HGKs)[J].Dent Mater,2017,33(3):333-343[29]Spitznagel FA,Horvath SD,Guess PC,et al.Resin bond to indirect composite and new ceramic/polymer materials: a review of the literature[J].J Esthet Restor Dent,2014,26(6):382-393[30]Li Z,Bortolotto T,Krejci I.Comparative invitro wear resistance of cad/cam composite resin and ceramic materials[J].J Prosthet Dent,2015,115(2):199-202[31]Lauvahutanon S,Takahashi H,Oki M,et al.In vitro evaluation of the wear resistance of composite resin blocks for cad/cam[J].. Dent Mater J,2015,34(4):495-502 |
苏公网安备32010602011670号