新型镍钛器械弯曲根管成形能力的研究进展

摘要/Abstract

摘要： ［摘要］弯曲根管的预备成形是根管治疗中的一大难点。近年来,随着新型镍钛器械不断发展,器械性能不断改进,对弯曲根管预备成形能力得以提升。本文就新型镍钛器械对弯曲根管预备成形能力的影响作一综述。

Abstract: Curved root canals are common in the clinic, and the complexity and variety of the curvatures make it difficult to maintain the original shape of the root canal and perform ideal canal preparation. Recently, with the continuous development of new thermomechanical-treated nickel-titanium instrument, the performance of the instruments has been improved to better prepare the curved canals. In this paper, the effect of new thermomechanical-treated nickel-titanium instruments on the shaping ability of curved canals is reviewed.

Key words: New thermomechanical-treated nickel-titanium instrument, Curved canals, Root canal preparation, Shaping ability

封菲曹立群张旗. 新型镍钛器械弯曲根管成形能力的研究进展[J]. 口腔医学, 2020, 40(10): 940-946.

Fei FENG. Advancement in shaping ability of new thermomechanical-treated nickel-titanium instrument in curved canals[J]. Stomatology, 2020, 40(10): 940-946.

参考文献 47

[1]	Sch?fer E, Diez C, Hoppe W, et al. Roentgenographic Investigation of Frequency and Degree of Canal Curvatures in Human Permanent Teeth [J]. J Endod, 2002, 28(3): 211-216.
[2]	Shen Y, Zhou H M, Zheng Y F, et al. Current Challenges and Concepts of the Thermomechanical Treatment of Nickel-Titanium Instruments [J]. J Endod, 2013, 39(2): 163-172.
[3]	Ruddle C, Machtou P, West J. The Shaping Movement: Fifth-Generation Technology [J]. Dent Today, 2013, 32(94): 96-99.
[4]	Yared G. Canal Preparation Using Only One Ni-Ti Rotary Instrument: Preliminary Observations [J]. Int Endod J, 2008, 41(4): 339-344.
[5]	赵亚楠, 薛明. 机用镍钛器械切削及成形能力的影响因素 [J]. 中国实用口腔科杂志, 2019, 12(04): 197-200.
[6]	Zupanc J, Vahdat-Pajouh N, Schaefer E. New Thermomechanically Treated Niti Alloys - a Review [J]. Int Endod J, 2018, 51(10): 1088-1103.
[7]	Shen Y, Zhou H-M, Zheng Y-F, et al. Current Challenges and Concepts of the Thermomechanical Treatment of Nickel-Titanium Instruments [J]. J Endod, 2013, 39(2): 163-172.
[8]	Theisen W, Schuermann A. Electro Discharge Machining of Nickel–Titanium Shape Memory Alloys [J]. Materials Science and Engineering: A, 2004, 378(1): 200-204.
[9]	Arbab-Chirani R, Chevalier V, Arbab-Chirani S, et al. Comparative Analysis of Torsional and Bending Behavior through Finite-Element Models of 5 Ni–Ti Endodontic Instruments [J]. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 2011, 111(1): 115-121.
[10]	Yum J, Cheung G S-P, Park J-K, et al. Torsional Strength and Toughness of Nickel-Titanium Rotary Files [J]. J Endod, 2011, 37(3): 382-386.
[11]	Versluis A, Kim H-C, Lee W, et al. Flexural Stiffness and Stresses in Nickel-Titanium Rotary Files for Various Pitch and Cross-Sectional Geometries [J]. J Endod, 2012, 38(10): 1399-1403.
[12]	Ha J-H, Kwak S W, Versluis A, et al. The Geometric Effect of an Off-Centered Cross-Section on Nickel–Titanium Rotary Instruments: A Finite Element Analysis Study [J]. Journal of Dental Sciences, 2017, 12(2): 173-178.
[13]	Berutti E, Chiandussi G, Gaviglio I, et al. Comparative Analysis of Torsional and Bending Stresses in Two Mathematical Models of Nickel-Titanium Rotary Instruments: Protaper Versus Profile [J]. J Endod, 2003, 29(1): 15-19.
[14]	Capar I D, Ertas H, Ok E, et al. Comparison of Single Cone Obturation Performance of Different Novel Nickel-Titanium Rotary Systems [J]. Acta Odontol Scand, 2014, 72(7): 537-542.
[15]	Azim A A, Piasecki L, Da Silva Neto U X, et al. Xp Shaper, a Novel Adaptive Core Rotary Instrument: Micro–Computed Tomographic Analysis of Its Shaping Abilities [J]. J Endod, 2017, 43(9): 1532-1538.
[16]	Gundappa M, Bansal R, Khoriya S, et al. Root Canal Centering Ability of Rotary Cutting Nickel Titanium Instruments: A Meta-Analysis [J]. J Conserv Dent, 2014, 17(6): 504-509.
[17]	Ahn S Y, Kim H C, Kim E. Kinematic Effects of Nickel-Titanium Instruments with Reciprocating or Continuous Rotation Motion: A Systematic Review of in Vitro Studies [J]. J Endod, 2016, 42(7): 1009-1017.
[18]	Pedulla E, Plotino G, Grande N M, et al. Shaping Ability of Two Nickel-Titanium Instruments Activated by Continuous Rotation or Adaptive Motion: A Micro-Computed Tomography Study [J]. Clin Oral Investig, 2016, 20(8): 2227-2233.
[19]	Capar I D, Ertas H, Ok E, et al. Comparative Study of Different Novel Nickel-Titanium Rotary Systems for Root Canal Preparation in Severely Curved Root Canals [J]. J Endod, 2014, 40(6): 852-856.
[20]	Silva E J N L, Pacheco P T, Pires F, et al. Microcomputed Tomographic Evaluation of Canal Transportation and Centring Ability of Protaper Next and Twisted File Adaptive Systems [J]. Int Endod J, 2017, 50(7): 694-699.
[21]	Silva E J N L, Tameir?o M D N, Belladonna F G, et al. Quantitative Transportation Assessment in Simulated Curved Canals Prepared with an Adaptive Movement System [J]. J Endod, 2015, 41(7): 1125-1129.
[22]	Pedrinha V F, Brandao J, Pessoa O F, et al. Influence of File Motion on Shaping, Apical Debris Extrusion and Dentinal Defects: A Critical Review [J]. Open Dent J, 2018, 12(1):189-201.
[23]	Gavini G, Santos M D, Caldeira C L, et al. Nickel-Titanium Instruments in Endodontics: A Concise Review of the State of the Art [J]. Braz Oral Res, 2018, 32(1): 44-65.
[24]	Capar I D, Arslan H. A Review of Instrumentation Kinematics of Engine-Driven Nickel-Titanium Instruments [J]. Int Endod J, 2016, 49(2): 119-135.
[25]	Kuzekanani M. Nickel-Titanium Rotary Instruments: Development of the Single-File Systems [J]. J Int Soc Prev Community Dent, 2018, 8(5): 386-390.
[26]	D'amario M, De Angelis F, Mancino M, et al. Canal Shaping of Different Single-File Systems in Curved Root Canals [J]. Journal of Dental Sciences, 2017, 12(4): 328-332.
[27]	Gambill J M, Alder M, Del Rio C E. Comparison of Nickel-Titanium and Stainless Steel Hand-File Instrumentation Using Computed Tomography [J]. J Endod, 1996, 22(7): 369-375.
[28]	Habib A A, Taha M I, Farah E M. Methodologies Used in Quality Assessment of Root Canal Preparation Techniques: Review of the Literature [J]. Journal of Taibah University Medical Sciences, 2015, 10(2): 123-131.
[29]	Cui Z, Wei Z, Du M, et al. Shaping Ability of Protaper Next Compared with Waveone in Late-Model Three-Dimensional Printed Teeth [J]. BMC Oral Health, 2018, 18(1): 115.
[30]	Wu H, Peng C, Bai Y, et al. Shaping Ability of Protaper Universal, Waveone and Protaper Next in Simulated L-Shaped and S-Shaped Root Canals [J]. BMC Oral Health, 2015, 15(27.
[31]	Yuan G, Yang G. Comparative Evaluation of the Shaping Ability of Single-File System Versus Multi-File System in Severely Curved Root Canals [J]. Journal of Dental Sciences, 2018, 13(1): 37-42.
[32]	江波, 黄静. 不同镍钛器械在弯曲根管预备中的比较 [J]. 口腔医学研究, 2019, 35(04): 331-334.
[33]	Huang Z, Quan J, Liu J, et al. A Microcomputed Tomography Evaluation of the Shaping Ability of Three Thermally-Treated Nickel-Titanium Rotary File Systems in Curved Canals [J]. J Int Med Res, 2019, 47(1): 325-334.
[34]	Kishore A, Gurtu A, Bansal R, et al. Comparison of Canal Transportation and Centering Ability of Twisted Files, Hyflex Controlled Memory, and Wave One Using Computed Tomography Scan: An in Vitro Study [J]. J Conserv Dent, 2017, 20(3): 161-165.
[35]	Marceliano-Alves M F, Sousa-Neto M D, Fidel S R, et al. Shaping Ability of Single-File Reciprocating and Heat-Treated Multifile Rotary Systems: A Micro-Ct Study [J]. Int Endod J, 2015, 48(12): 1129-1136.
[36]	Van Der Vyver P J, Paleker F, Vorster M, et al. Root Canal Shaping Using Nickel Titanium, M-Wire, and Gold Wire: A Micro-Computed Tomographic Comparative Study of One Shape, Protaper Next, and Waveone Gold Instruments in Maxillary First Molars [J]. J Endod, 2019, 45(1): 62-67.
[37]	Gagliardi J, Versiani M A, De Sousa-Neto M D, et al. Evaluation of the Shaping Characteristics of Protaper Gold, Protaper Next, and Protaper Universal in Curved Canals [J]. J Endod, 2015, 41(10): 1718-1724.
[38]	Pacheco-Yanes J, Gazzaneo I, Perez A R, et al. Transportation Assessment in Artificial Curved Canals after Instrumentation with Reciproc, Reciproc Blue, and XP-Endo Shaper Systems [J]. J Investig Clin Dent, 2019, e12417.
[39]	Peters O A, Boessler C, Paqué F. Root Canal Preparation with a Novel Nickel-Titanium Instrument Evaluated with Micro-Computed Tomography: Canal Surface Preparation over Time [J]. J Endod, 2010, 36(6): 1068-1072.
[40]	Love R M, Jenkinson H F. Invasion of Dentinal Tubules by Oral Bacteria [J]. Crit Rev Oral Biol Med, 2002, 13(2): 171-183.
[41]	Wilcox L R, Roskelley C, Sutton T. The Relationship of Root Canal Enlargement to Finger-Spreader Induced Vertical Root Fracture [J]. J Endod, 1997, 23(8): 533-534.
[42]	Lim S S, Stock C J R. The Risk of Perforation in the Curved Canal - Anticurvature Filing Compared with the Stepback Technique [J]. Int Endod J, 1987, 20(1): 33-39.
[43]	Venino P M, Citterio C L, Pellegatta A, et al. A Micro–Computed Tomography Evaluation of the Shaping Ability of Two Nickel-Titanium Instruments, Hyflex Edm and Protaper Next [J]. J Endod, 2017, 43(4): 628-632.
[44]	Sousa-Neto M D, Silva-Sousa Y C, Mazzi-Chaves J F, et al. Root Canal Preparation Using Micro-Computed Tomography Analysis: A Literature Review [J]. Braz Oral Res, 2018, 32(1): 20-43.
[45]	De-Deus G, Rodrigues E A, Belladonna F G, et al. Anatomical Danger Zone Reconsidered: A Micro-Ct Study on Dentine Thickness in Mandibular Molars [J]. Int Endod J, 2019, 52(10): 1501-1507.
[46]	Ceyhanli K T, Kamaci A, Taner M, et al. Shaping Ability of Two M-Wire and Two Traditional Nickel-Titanium Instrumentation Systems in S-Shaped Resin Canals [J]. Niger J Clin Pract, 2015, 18(6): 713-717.
[47]	Burklein S, Poschmann T, Schafer E. Shaping Ability of Different Nickel-Titanium Systems in Simulated S-Shaped Canals with and without Glide Path [J]. J Endod, 2014, 40(8): 1231-1234.