| [1] Okulus Z, Buchwald T, Szybowicz M, et al. Study of a new resin-based composites containing hydroxyapatite filler using Raman and infrared spectroscopy[J]. Materials Chemistry and Physics, 2014, 145(3): 304-312.[2] Tuncel A, Oezdemir A K, Suemer Z, et al. Cytotoxicity evaluation of two different composites with/without fibers and one nanohybrid composite[J]. Dental materials journal, 2006, 25(2): 267-271.[3] Liu W W, He X P, Mo A C, et al. Investigation of the mechanical properties of a low-shrinkage liquid crystalline matrix combined with nano-hydroxyapatite[J]. International journal of nanomedicine, 2011, 6: 1787.[4] Atai M, Ahmadi M, Babanzadeh S, et al. Synthesis, characterization, shrinkage and curing kinetics of a new low-shrinkage urethane dimethacrylate monomer for dental applications[J]. Dental Materials, 2007, 23(8): 1030-1041.[5] Li T, Akao M, Takagi M. Tissue reaction of hydroxyapatite sol to rat molar pulp[J]. Journal of Materials Science: Materials in Medicine, 1998, 9(11): 631-642.[6] Wang X, Li Y, Wei J, et al. Development of biomimetic nano-hydroxyapatite/poly (hexamethylene adipamide) composites[J]. Biomaterials, 2002, 23(24): 4787-4791.[7] Okulus Z, Héberger K, Voelkel A. Sorption, solubility, and mass changes of hydroxyapatite-containing composites in artificial saliva, food simulating solutions, tea, and coffee[J]. Journal of Applied Polymer Science, 2014, 131(3).[8] Peters M C, Bresciani E, Barata T J E, et al. In vivo dentin remineralization by calcium-phosphate cement[J]. Journal of dental research, 2010, 89(3): 286-291.[9] Karacaer ?, Polat T N, Tezverg?l A, et al. The effect of length and concentration of glass fibers on the mechanical properties of an injection-and a compression-molded denture base polymer[J]. The Journal of prosthetic dentistry, 2003, 90(4): 385-393.[10] Debnath S, Wunder S L, McCool J I, et al. Silane treatment effects on glass/resin interfacial shear strengths[J]. Dental Materials, 2003, 19(5): 441-448.[11] Harding I S, Rashid N, Hing K A. Surface charge and the effect of excess calcium ions on the hydroxyapatite surface[J]. Biomaterials, 2005, 26(34): 6818-6826.[12] Zhang H, Darvell B W. Failure and behavior in water of hydroxyapatite whisker-reinforced bis-GMA-based resin composites[J]. Journal of the mechanical behavior of biomedical materials, 2012, 10: 39-47.[13] Zhang H, Zhang M. Effect of surface treatment of hydroxyapatite whiskers on the mechanical properties of bis-GMA-based composites[J]. Biomedical Materials, 2010, 5(5): 054106.[14] Tham W L, Chow W S, Ishak Z A. The effect of 3-(trimethoxysilyl) propyl methacrylate on the mechanical, thermal, and morphological properties of poly (methyl methacrylate)/hydroxyapatite composites[J]. Journal of applied polymer science, 2010, 118(1): 218-228.[15] Lezaja M, Veljovic D N, Jokic B M, et al. Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage[J]. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2013, 101(8): 1469-1476.[16] Wang M, Deb S, Bonfield W. Chemically coupled hydroxyapatite-polyethylene composites: processing and characterisation[J]. Materials Letters, 2000, 44(2): 119-124.[17] Chow W S, Khim L Y, Kang A T. Flexural properties of polystyrene/organo-montmorillonite masterbatch composites[J]. Journal of Reinforced Plastics and Composites, 2008, 27(3): 255-261.[18] Chen L, Xu C, Wang Y, et al. BisGMA/TEGDMA dental nanocomposites containing glyoxylic acid-modified high-aspect ratio hydroxyapatite nanofibers with enhanced dispersion[J]. Biomedical Materials, 2012, 7(4): 045014.[19] Stein P S, Sullivan J, Haubenreich J E, et al. Composite resin in medicine and dentistry[J]. Journal of long-term effects of medical implants, 2005, 15(6).[20] Chen L, Yu Q, Wang Y, et al. BisGMA/TEGDMA dental composite containing high aspect-ratio hydroxyapatite nanofibers[J]. Dental Materials, 2011, 27(11): 1187-1195.[21] Zhang H, Darvell B W. Mechanical properties of hydroxyapatite whisker-reinforced bis-GMA-based resin composites[J]. Dental materials, 2012, 28(8): 824-830.[22] Liu F, Wang R, Cheng Y, et al. Polymer grafted hydroxyapatite whisker as a filler for dental composite resin with enhanced physical and mechanical properties[J]. Materials Science and Engineering: C, 2013, 33(8): 4994-5000.[23] Zhang H, Zhang M, Shen Y, et al. Biocompatibility and bioactivity of hydroxyapatite whiskers reinforced bis-GMA based composites[C]//Biomedical Engineering and Informatics (BMEI), 2010 3rd International Conference on. IEEE, 2010, 4: 1640-1644.[24] Liu F, Jiang X, Zhang Q, et al. Strong and bioactive dental resin composite containing poly (Bis-GMA) grafted hydroxyapatite whiskers and silica nanoparticles[J]. Composites Science and Technology, 2014, 101: 86-93.[25] Liu F, Sun B, Jiang X, et al. Mechanical properties of dental resin/composite containing urchin-like hydroxyapatite[J]. Dental Materials, 2014, 30(12): 1358-1368.[26] Wang Y, Shi J, Han L, et al. Crystallization and mechanical properties of T-ZnOw/HDPE composites[J]. Materials Science and Engineering: A, 2009, 501(1): 220-228.[27] Shi J, Wang Y, Liu L, et al. Tensile fracture behaviors of T-ZnOw/polyamide 6 composites[J]. Materials Science and Engineering: A, 2009, 512(1): 109-116. |
