两种数字化导板的对比分析

Abstract

Abstract: With the application of CBCT, the development of CAD/CAM and 3D printing technology, the application of digital implanted guides is increasing. It can control the precise implantation of implants and reduce the complications of surgery. According to the mode of navigation in surgery, it can be divided into partially guide template and fully guide template. This paper summarizes the comparative analysis of the accuracy, complications, cost-effectiveness of the two guides.

Key words: fully-navigated digital guide, partial navigated digital guide, accuracy, bone burns, cost-effectiveness

CLC Number:

R783.4

References 35

[1]	Buser D, Halbritter S, Hart C, Bornstein MM, Grutter L, Chappuis V, et al. Early implant placement with simultaneous guided bone regeneration following single-tooth extraction in the esthetic zone: 12-month results of a prospective study with 20 consecutive patients[J]. J Periodontol, 2009,80(1):152-62.
[2]	Buser D, Bornstein MM, Weber HP, Grutter L, Schmid B, Belser UC. Early implant placement with simultaneous guided bone regeneration following single-tooth extraction in the esthetic zone: a cross-sectional, retrospective study in 45 subjects with a 2- to 4-year follow-up[J]. J Periodontol, 2008,79(9):1773-81.
[3]	Linkevicius T, Puisys A, Vindasiute E, Linkeviciene L, Apse P. Does residual cement around implant-supported restorations cause peri-implant disease? A retrospective case analysis[J]. Clinical oral implants research, 2013,24(11):1179-84.
[4]	Staubli N, Walter C, Schmidt JC, Weiger R, Zitzmann NU. Excess cement and the risk of peri-implant disease - a systematic review[J]. Clinical oral implants research, 2017,28(10):1278-90.
[5]	Hermann JS, Schoolfield JD, Schenk RK, Buser D, Cochran DL. Influence of the size of the microgap on crestal bone changes around titanium implants. A histometric evaluation of unloaded non-submerged implants in the canine mandible[J]. J Periodontol, 2001,72(10):1372-83.
[6]	Apostolakis D, Kourakis G. CAD/CAM implant surgical guides: maximum errors in implant positioning attributable to the properties of the metal sleeve/osteotomy drill combination[J]. International journal of implant dentistry, 2018,4(1):34.
[7]	Ma B, Park T, Chun I, Yun K. The accuracy of a 3D printing surgical guide determined by CBCT and model analysis[J]. The journal of advanced prosthodontics, 2018,10(4):279-85.
[8]	Hultin M, Svensson KG, Trulsson M. Clinical advantages of computer-guided implant placement: a systematic review[J]. Clinical oral implants research, 2012,23 Suppl 6:124-35.
[9]	Chen CK, Yuh DY, Huang RY, Fu E, Tsai CF, Chiang CY. Accuracy of Implant Placement with a Navigation System, a Laboratory Guide, and Freehand Drilling[J]. The International journal of oral & maxillofacial implants, 2018,33(6):1213-8.
[10]	Turbush SK, Turkyilmaz I. Accuracy of three different types of stereolithographic surgical guide in implant placement: an in vitro study[J]. J Prosthet Dent, 2012,108(3):181-8.
[11]	Geng W, Liu C, Su Y, Li J, Zhou Y. Accuracy of different types of computer-aided design/computer-aided manufacturing surgical guides for dental implant placement[J]. International journal of clinical and experimental medicine, 2015,8(6):8442-9.
[12]	D'Haese J, Ackhurst J, Wismeijer D, De Bruyn H, Tahmaseb A. Current state of the art of computer-guided implant surgery[J]. Periodontology 2000, 2017,73(1):121-33.
[13]	Tahmaseb A, Wismeijer D, Coucke W, Derksen W. Computer technology applications in surgical implant dentistry: a systematic review[J]. The International journal of oral & maxillofacial implants, 2014,29 Suppl:25-42.
[14]	Torabi K, Farjood E, Hamedani S. Rapid Prototyping Technologies and their Applications in Prosthodontics, a Review of Literature[J]. Journal of dentistry (Shiraz, Iran), 2015,16(1):1-9.
[15]	Pattanaik S, Pattanaik BK. Fabrication of a surgical guide with help of a milling machine by ridge mapping method[J]. Journal of Indian Prosthodontic Society, 2013,13(1):61-5.
[16]	Scherer U, Stoetzer M, Ruecker M, Gellrich NC, von See C. Template-guided vs. non-guided drilling in site preparation of dental implants[J]. Clinical oral investigations, 2015,19(6):1339-46.
[17]	Naziri E, Schramm A, Wilde F. Accuracy of computer-assisted implant placement with insertion templates[J]. GMS Interdisciplinary plastic and reconstructive surgery DGPW, 2016,5:Doc15.
[18]	Chang RJ, Chen HL, Huang LG, Wong YK. Accuracy of implant placement with a computer-aided fabricated surgical template with guided parallel pins: A pilot study[J]. Journal of the Chinese Medical Association : JCMA, 2018,81(11):970-6.
[19]	Fang Y, An X, Jeong SM, Choi BH. Accuracy of computer-guided implant placement in anterior regions[J]. J Prosthet Dent, 2018.
[20]	Bencharit S, Staffen A, Yeung M, Whitley D, 3rd, Laskin DM, Deeb GR. In Vivo Tooth-Supported Implant Surgical Guides Fabricated With Desktop Stereolithographic Printers: Fully Guided Surgery Is More Accurate Than Partially Guided Surgery[J]. Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons, 2018,76(7):1431-9.
[21]	Boverramos F, Vi?aalmunia DJ, Cerveraballester PJ, Pe?arrochadiago DM, PhD, Garcíamira MB, et al. Accuracy of Implant Placement with Computer-Guided Surgery: A Systematic Review and Meta-Analysis Comparing Cadaver, Clinical, and In Vitro Studies[J]. Int J Oral Max Impl, 2017,33(1):101-15.
[22]	Marliere DAA, Demetrio MS, Picinini LS, De Oliveira RG, Chaves Netto HDM. Accuracy of computer-guided surgery for dental implant placement in fully edentulous patients: A systematic review[J]. European journal of dentistry, 2018,12(1):153-60.
[23]	Kuhl S, Zurcher S, Mahid T, Muller-Gerbl M, Filippi A, Cattin P. Accuracy of full guided vs. half-guided implant surgery[J]. Clinical oral implants research, 2013,24(7):763-9.
[24]	Choi W, Nguyen BC, Doan A, Girod S, Gaudilliere B, Gaudilliere D. Freehand Versus Guided Surgery: Factors Influencing Accuracy of Dental Implant Placement[J]. Implant Dent, 2017,26(4).
[25]	Zhou W, Liu Z, Song L, Kuo CL, Shafer DM. Clinical Factors Affecting the Accuracy of Guided Implant Surgery-A Systematic Review and Meta-analysis[J]. The journal of evidence-based dental practice, 2018,18(1):28-40.
[26]	A Ferhat M, Mahmut S, Murat Y, Erol E. Effect of surgical drill guide on heat generated from implant drilling[J]. Journal of Oral & Maxillofacial Surgery Official Journal of the American Association of Oral & Maxillofacial Surgeons, 2009,67(12):2663-8.
[27]	Benington IC, Biagioni PA, Briggs J, Sheridan S, Lamey PJ. Thermal changes observed at implant sites during internal and external irrigation[J]. Clinical oral implants research, 2010,13(3):293-7.
[28]	A. RE, D. D. S, T. Albrektsson, Ph. D. Temperature threshold levels for heat-induced bone tissue injury: A vital-microscopic study in the rabbit[J]. J Prosthet Dent, 1983,50(1):101-7.
[29]	Tehemar SH. Factors affecting heat generation during implant site preparation: a review of biologic observations and future considerations[J]. The International journal of oral & maxillofacial implants, 1999,14(1):127-36.
[30]	Eriksson RA, Albrektsson T, . The effect of heat on bone regeneration: an experimental study in the rabbit using the bone growth chamber[J]. Journal of Oral & Maxillofacial Surgery Official Journal of the American Association of Oral & Maxillofacial Surgeons, 1984,42(11):705-11.
[31]	dos Santos PL, Queiroz TP, Margonar R, Ac DSC, Jr BW, Rezende RR, et al. Evaluation of bone heating, drill deformation, and drill roughness after implant osteotomy: guided surgery and classic drilling procedure[J]. Int J Oral Max Impl, 2014,29(1):51.
[32]	Younes F, Eghbali A, De Bruyckere T, Cleymaet R, Cosyn J. A randomized controlled trial on the efficiency of free-handed, pilot-drill guided and fully guided implant surgery in partially edentulous patients[J]. Clinical oral implants research, 2018.
[33]	Shen P, Zhao J, Fan L, Qiu H, Xu W, Wang Y, et al. Accuracy evaluation of computer-designed surgical guide template in oral implantology[J]. Journal of Cranio-Maxillo-Facial Surgery, 2015,43(10):2189-94.
[34]	Sethi A, Kaus T. Immediate Replacement of Single Teeth With Immediately Loaded Implants: Retrospective Analysis of a Clinical Case Series[J]. Implant Dent, 2016,26(1):30.
[35]	Van dVT, Glor F, De BH. A model study on flapless implant placement by clinicians with a different experience level in implant surgery[J]. Clinical oral implants research, 2010,19(1):66-72.

Comparative analysis of two digital implanted guides

Knowledge

Abstract

Cite this article

share this article

References 35

Related Articles 5

Recommended Articles

Metrics

Comments

[1]	. An in vitro study of the precision of CAD/CAM guides in the posterior area [J]. , 2019, 39(1): 15-19.
[2]	. An in vivo evaluation of the accuracy of 3Shape TRIOS for the whole maxilla [J]. , 2018, 38(9): 808-813.
[3]	. Accuracy of digital impression in gingival soft tissues of patients with chronic periodontitis [J]. , 2018, 38(5): 422-427.
[4]	. The comparison of precision among three types method of cavity preparation directed by simple template of dental implant centered on repair. [J]. , 2016, 36(9): 832-834.
[5]	. The development and progress of the indirect bonding technology [J]. , 2015, 35(4): 318-320.