口腔医学 ›› 2023, Vol. 43 ›› Issue (10): 925-929.doi: 10.13591/j.cnki.kqyx.2023.10.012
修回日期:
2022-10-22
出版日期:
2023-10-28
发布日期:
2023-10-20
通讯作者:
刘佳
E-mail:woxiao1987@163.com
基金资助:
XU Jianing1,2,JIN Zuolin2,3,LIU Jia2,3()
Revised:
2022-10-22
Online:
2023-10-28
Published:
2023-10-20
摘要:
3D打印技术契合了口腔正畸个性化强、精度高和器械结构复杂的需求,近年来受到高度关注并成为该领域的研究热点。在概括介绍口腔正畸常用3D打印技术的基础上,就其近年来在口腔正畸的应用及相关问题研究的进展作了综述。牙颌模型、微型种植体导板、咬合板、下颌前伸类口腔矫治器和扩弓装置已可通过数字化流程结合3D打印进行制作,并展现出独有的显著优势,新材料的问世使得3D打印热塑性矫治器正成为可能。然而,3D打印间接粘接托盘口内放置托槽的准确性还需更多临床研究进行验证。
中图分类号:
许嘉宁, 金作林, 刘佳. 3D打印在口腔正畸领域的应用进展[J]. 口腔医学, 2023, 43(10): 925-929.
XU Jianing, JIN Zuolin, LIU Jia. Application progress of 3D printing in orthodontics[J]. Stomatology, 2023, 43(10): 925-929.
[1] |
Oberoi G, Nitsch S, Edelmayer M, et al. 3D printing-encompassing the facets of dentistry[J]. Front Bioeng Biotechnol, 2018, 6:172.
doi: 10.3389/fbioe.2018.00172 |
[2] |
Kim GT, Go HB, Yu JH, et al. Cytotoxicity, colour stability and dimensional accuracy of 3D printing resin with three different photoinitiators[J]. Polymers, 2022, 14(5):979.
doi: 10.3390/polym14050979 |
[3] |
Kessler A, Hickel R, Reymus M. 3D printing in dentistry-state of the art[J]. Oper Dent, 2020, 45(1):30-40.
doi: 10.2341/18-229-L pmid: 31172871 |
[4] |
Camardella LT, de Vasconcellos Vilella O, Breuning H. Accuracy of printed dental models made with 2 prototype technologies and different designs of model bases[J]. Am J Orthod Dentofacial Orthop, 2017, 151(6):1178-1187.
doi: 10.1016/j.ajodo.2017.03.012 |
[5] |
Hazeveld A, Huddleston Slater JJR, Ren YJ. Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniques[J]. Am J Orthod Dentofacial Orthop, 2014, 145(1):108-115.
doi: 10.1016/j.ajodo.2013.05.011 |
[6] |
von Glasenapp J, Hofmann E, Süpple J, et al. Comparison of two 3D-printed indirect bonding (IDB) tray design versions and their influence on the transfer accuracy[J]. J Clin Med, 2022, 11(5):1295.
doi: 10.3390/jcm11051295 |
[7] |
Pereira ABN, Almeida RC, Marassi C, et al. Do low-cost 3-dimensional printers produce suitable dental models?[J]. Am J Orthod Dentofacial Orthop, 2022, 161(6):858-865.
doi: 10.1016/j.ajodo.2021.06.018 |
[8] |
Huang Y, Zhang XF, Gao G, et al. 3D bioprinting and the current applications in tissue engineering[J]. Biotechnol J, 2017, 12(8):1600734.
doi: 10.1002/biot.v12.8 |
[9] | 史玉升, 鲁中良, 章文献, 等. 选择性激光熔化快速成形技术与装备[J]. 中国表面工程, 2006, 19(5):150-153. |
[10] | 田而慷, 王双成, 刘桢, 等. 3D打印在正畸托槽制作中的应用现状[J]. 医学综述, 2022, 28(2):307-312. |
[11] |
Wan Hassan WN, Yusoff Y, Mardi NA. Comparison of reconstructed rapid prototyping models produced by 3-dimensional printing and conventional stone models with different degrees of crowding[J]. Am J Orthod Dentofacial Orthop, 2017, 151(1):209-218.
doi: 10.1016/j.ajodo.2016.08.019 |
[12] |
Vlaskalic V, Boyd R. Orthodontic treatment of a mildly crowded malocclusion using the Invisalign system[J]. Aust Orthod J, 2001, 17(1):41-46.
pmid: 11506169 |
[13] |
Ko J, Bloomstein RD, Briss D, et al. Effect of build angle and layer height on the accuracy of 3-dimensional printed dental models[J]. Am J Orthod Dentofacial Orthop, 2021, 160(3):451-458.
doi: 10.1016/j.ajodo.2020.11.039 |
[14] |
Boyer RA, Kasper FK, English JD, et al. Effect of print orientation on the dimensional accuracy of orthodontic aligners printed 3-dimensionally[J]. Am J Orthod Dentofacial Orthop, 2021, 160(5):732-742.
doi: 10.1016/j.ajodo.2021.01.018 |
[15] |
Bucci R, Rongo R, Levatè C, et al. Thickness of orthodontic clear aligners after thermoforming and after 10 days of intraoral exposure:A prospective clinical study[J]. Prog Orthod, 2019, 20(1):36.
doi: 10.1186/s40510-019-0289-6 |
[16] |
Ryu JH, Kwon JS, Jiang HB, et al. Effects of thermoforming on the physical and mechanical properties of thermoplastic materials for transparent orthodontic aligners[J]. Korean J Orthod, 2018, 48(5):316-325.
doi: 10.4041/kjod.2018.48.5.316 |
[17] |
Edelmann A, English JD, Chen SJ, et al. Analysis of the thickness of 3-dimensional-printed orthodontic aligners[J]. Am J Orthod Dentofacial Orthop, 2020, 158(5):e91-e98.
doi: 10.1016/j.ajodo.2020.07.029 |
[18] |
Lee SY, Kim H, Kim HJ, et al. Thermo-mechanical properties of 3D printed photocurable shape memory resin for clear aligners[J]. Sci Rep, 2022, 12(1):6246.
doi: 10.1038/s41598-022-09831-4 pmid: 35428796 |
[19] | Tsolakis IA, Gizani S, Tsolakis AI, et al. Three-dimensional-printed customized orthodontic and pedodontic appliances:A critical review of a new era for treatment[J]. Children (Basel), 2022, 9(8):1107. |
[20] |
Cole D, Bencharit S, Carrico CK, et al. Evaluation of fit for 3D-printed retainers compared with thermoform retainers[J]. Am J Orthod Dentofacial Orthop, 2019, 155(4):592-599.
doi: 10.1016/j.ajodo.2018.09.011 |
[21] |
Naeem OA, Bencharit S, Yang IH, et al. Comparison of 3-dimensional printing technologies on the precision, trueness, and accuracy of printed retainers[J]. Am J Orthod Dentofacial Orthop, 2022, 161(4):582-591.
doi: 10.1016/j.ajodo.2021.03.016 |
[22] |
Williams A, Bencharit S, Yang IH, et al. Effect of print angulation on the accuracy and precision of 3D-printed orthodontic retainers[J]. Am J Orthod Dentofacial Orthop, 2022, 161(1):133-139.
doi: 10.1016/j.ajodo.2021.01.020 |
[23] |
El-Timamy AM, El-Sharaby FA, Eid FH, et al. Three-dimensional imaging for indirect-direct bonding[J]. Am J Orthod Dentofacial Orthop, 2016, 149(6):928-931.
doi: 10.1016/j.ajodo.2015.12.009 |
[24] |
Plattner J, Othman A, Arnold J, et al. Comparative study between the overall production time of digitally versus conventionally produced indirect orthodontic bonding trays[J]. Turk J Orthod, 2020, 33(4):232-238.
doi: 10.5152/TurkJOrthod. |
[25] |
Hoffmann L, Sabbagh H, Wichelhaus A, et al. Bracket transfer accuracy with two different three-dimensional printed transfer trays vs silicone transfer trays[J]. Angle Orthod, 2022, 92(3):364-371.
doi: 10.2319/040821-283.1 pmid: 34982114 |
[26] |
Bachour PC, Klabunde R, Grünheid T. Transfer accuracy of 3D-printed trays for indirect bonding of orthodontic brackets[J]. Angle Orthod, 2022, 92(3):372-379.
doi: 10.2319/073021-596.1 pmid: 35006236 |
[27] |
Grymak A, Waddell JN, Aarts JM, et al. Evaluation of wear behaviour of various occlusal splint materials and manufacturing processes[J]. J Mech Behav Biomed Mater, 2022, 126:105053.
doi: 10.1016/j.jmbbm.2021.105053 |
[28] |
Marcel R, Reinhard H, Andreas K. Accuracy of CAD/CAM-fabricated bite splints:Milling vs 3D printing[J]. Clin Oral Investig, 2020, 24(12):4607-4615.
doi: 10.1007/s00784-020-03329-x |
[29] |
Wedekind L, Güth JF, Schweiger J, et al. Elution behavior of a 3D-printed, milled and conventional resin-based occlusal splint material[J]. Dent Mater, 2021, 37(4):701-710.
doi: 10.1016/j.dental.2021.01.024 pmid: 33648744 |
[30] |
Xu YC, Xepapadeas AB, Koos B, et al. Effect of post-rinsing time on the mechanical strength and cytotoxicity of a 3D printed orthodontic splint material[J]. Dent Mater, 2021, 37(5):e314-e327.
doi: 10.1016/j.dental.2021.01.016 pmid: 33610310 |
[31] |
Berli C, Thieringer FM, Sharma N, et al. Comparing the mechanical properties of pressed, milled, and 3D-printed resins for occlusal devices[J]. J Prosthet Dent, 2020, 124(6):780-786.
doi: 10.1016/j.prosdent.2019.10.024 pmid: 31955837 |
[32] |
Grymak A, Aarts JM, Ma S, et al. Comparison of hardness and polishability of various occlusal splint materials[J]. J Mech Behav Biomed Mater, 2021, 115:104270.
doi: 10.1016/j.jmbbm.2020.104270 |
[33] | Vasoglou G, Stefanidaki I, Apostolopoulos K, et al. Accuracy of mini-implant placement using a computer-aided designed surgical guide, with information of intraoral scan and the use of a cone-beam CT[J]. Dent J (Basel), 2022, 10(6):104. |
[34] |
Su L, Song H, Huang XF. Accuracy of two orthodontic mini-implant templates in the infrazygomatic crest zone:A prospective cohort study[J]. BMC Oral Health, 2022, 22(1):252.
doi: 10.1186/s12903-022-02285-0 |
[35] |
Pop SI, Dudescu M, Mihali SG, et al. Effects of disinfection and steam sterilization on the mechanical properties of 3D SLA- and DLP-printed surgical guides for orthodontic implant placement[J]. Polymers, 2022, 14(10):2107.
doi: 10.3390/polym14102107 |
[36] |
Hamalian TA, Nasr E, Chidiac JJ. Impression materials in fixed prosthodontics:Influence of choice on clinical procedure[J]. J Prosthodont, 2011, 20(2):153-160.
doi: 10.1111/jopr.2011.20.issue-2 |
[37] |
Piskin B, Uyar A, Yuceer M, et al. Fabrication of a mandibular advancement device using a fully digital workflow:A clinical report[J]. J Prosthodont, 2021, 30(3):191-195.
doi: 10.1111/jopr.v30.3 |
[38] |
Lee PT, Sheridan RR. Technique to fabricate custom nasal pillows and monoblock mandibular advancement device using a digital workflow for combination therapy of obstructive sleep apnea[J]. J Prosthodont, 2021, 30(4):367-371.
doi: 10.1111/jopr.13331 pmid: 33459445 |
[39] |
刘从华, 毛琴, 王春林. 上颌横向扩弓技术的应用及研究进展[J]. 口腔疾病防治, 2020, 28(11):689-697.
doi: 10.12016/j.issn.2096-1456.2020.11.002 |
[40] |
Graf S, Vasudavan S, Wilmes B. CAD-CAM design and 3-dimensional printing of mini-implant retained orthodontic appliances[J]. Am J Orthod Dentofacial Orthop, 2018, 154(6):877-882.
doi: 10.1016/j.ajodo.2018.07.013 |
[41] |
Graf S, Cornelis MA, Hauber Gameiro G, et al. Computer-aided design and manufacture of hyrax devices:Can we really go digital?[J]. Am J Orthod Dentofacial Orthop, 2017, 152(6):870-874.
doi: 10.1016/j.ajodo.2017.06.016 |
[42] |
王春林, 兰泽栋, 毛琴, 等. 个性化微支抗钉辅助快速扩弓器扩展成人腭中缝的疗效[J]. 口腔疾病防治, 2020, 28(10):657-663.
doi: 10.12016/j.issn.2096-1456.2020.10.008 |
[43] |
Cozzani M, Antonini S, Lupini D, et al. A new proposal:A digital flow for the construction of a Haas-inspired rapid maxillary expander (HIRME)[J]. Materials (Basel), 2020, 13(13):2898.
doi: 10.3390/ma13132898 |
[1] | 陈艺菲,张辰玥,张璟岚,张滨婧,戎鑫,胡芝爱. 三维打印血管的研究进展[J]. 口腔医学, 2023, 43(1): 82-87. |
[2] | 宋野, 韩晶莹. 正畸前磨牙拔除模式对Bolton指数的影响研究进展[J]. 口腔医学, 2022, 42(9): 856-859. |
[3] | 邓磊, 雷雨晨, 陈岗, 王超, 黄海涛. 3D打印个性化钛网引导种植区骨再生的临床并发症研究[J]. 口腔医学, 2022, 42(3): 244-249. |
[4] | 刘爽, 马国武. 3D打印钴铬合金和铸造钴铬合金的理化性能和生物相容性的比较[J]. 口腔医学, 2022, 42(3): 210-214. |
[5] | 卿萍, 吴蓉. 3D打印临时冠在后牙游离缺失种植修复中的应用[J]. 口腔医学, 2022, 42(2): 136-139. |
[6] | 廖梦圆 严斌 吴大明 孙志达 颜越 戴月明 谢海峰. 一种新型数字化桩核修复技术[J]. , 2021, 41(9): 825-829. |
[7] | 吴雁格 张紫涵 巩靖蕾 黄艳梅 王军. 基于可视化治疗目标预测正畸软组织变化的研究进展[J]. , 2021, 41(8): 742-745. |
[8] | 吕佳 谢琳 董作青. 修复联合正畸治疗先天缺牙回顾分析[J]. , 2020, 40(2): 151-156. |
[9] | 操亚波 傅露 郁雯科 王硕 李伯休 陈丹鹏. 数字化排牙试验在正畸病例拔牙与否判断中的应用[J]. , 2019, 39(1): 44-47. |
[10] | 谢明杰 李潇. 影响3D打印的口腔修复体精密度的因素[J]. , 2018, 38(9): 860-864. |
[11] | 吴坡 羊书勇 鄢兰元 蒋佶 李焰 李浩 郑维银. 3D打印导板在头颈晚期恶性肿瘤125I粒子[J]. , 2018, 38(8): 708-712. |
[12] | 丁刘闯 赵小琦 韩祥祯 周琦琪 宋艳艳 张梦雪 何惠宇. 3D打印聚乙烯醇/纳米羟基磷灰石支架与丝素蛋白/聚乙烯醇/纳米羟基磷灰石支架的性能比较[J]. , 2018, 38(7): 592-596. |
[13] | 李雪琦. 口腔正畸治疗患者下颌第三磨牙状态改变的相关危险因素分析[J]. , 2018, 38(5): 445-448. |
[14] | 魏天骄 廖国婷 王柳力 郭欣 冯剑桥. 3D打印美学模板冠边缘适合性的初步研究[J]. , 2018, 38(3): 249-254. |
[15] | 傅肄芃 严斌. 牙周膜生物力学性质的试验研究进展[J]. , 2017, 37(9): 844-848. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||