数字化印模技术在可摘局部义齿中的应用及其准确度的影响因素

doi:10.13591/j.cnki.kqyx.2024.04.014

Abstract

Abstract:

Digital impression technology has become one of the more commonly used impressions in clinical practice and is widely used in the field of removable partial denture restorations for dental defects. This article introduces the application of digital impression technology in removable partial denture restorations and reviews the factors influencing the accuracy of digital intraoral impressions in order to provide guidance for clinical application.

Key words: digital impression technique, altered cast impression technique, removable partial denture, accuracy

CLC Number:

R783.4

WANG Liaoliao, YANG Yaoyao, WU Jiang. Application of digital impression technique in removable partial denture restoration and factors affecting its accuracy[J]. Stomatology, 2024, 44(4): 312-315.

References 35

[1]	朱国慧, 孙迎春, 高平. 口腔数字化印模精度的研究与进展[J]. 口腔颌面修复学杂志, 2017, 18(2):125-128.
[2]	Mandelli F, Ferrini F, Gastaldi G, et al. Improvement of a digital impression with conventional materials: Overcoming intraoral scanner limitations[J]. Int J Prosthodont, 2017, 30(4):373-376. doi: 10.11607/ijp.5138 pmid: 28697209
[3]	宁佳. 数字化技术在口腔修复的应用[J]. 继续医学教育, 2015, 29(3):91-93.
[4]	Goodacre BJ, Goodacre CJ. Using intraoral scanning to fabricate complete dentures: First experiences[J]. Int J Prosthodont, 2018, 31(2):166-170. doi: 10.11607/ijp.5624 pmid: 29518812
[5]	Unkovskiy A, Wahl E, Zander AT, et al. Intraoral scanning to fabricate complete dentures with functional borders: A proof-of-concept case report[J]. BMC Oral Health, 2019, 19(1):46. doi: 10.1186/s12903-019-0733-5 pmid: 30866892
[6]	Tasaka A, Uekubo Y, Mitsui T, et al. Applying intraoral scanner to residual ridge in edentulous regions: in vitro evaluation of inter-operator validity to confirm trueness[J]. BMC Oral Health, 2019, 19(1):264. doi: 10.1186/s12903-019-0918-y
[7]	吴江, 陈吉华. 数字化技术在可摘局部义齿和全口义齿制作中的应用现状与未来[J]. 口腔医学, 2022, 42(5):385-390.
[8]	Nishiyama H, Taniguchi A, Tanaka S, et al. Novel fully digital workflow for removable partial denture fabrication[J]. J Prosthodont Res, 2020, 64(1):98-103. doi: S1883-1958(19)30022-2 pmid: 31229550
[9]	张楠, 刘庆, 刘娜, 等. 数字化印模对可摘局部义齿临床适合性的影响[J]. 口腔医学研究, 2019, 35(1):67-70. doi: 10.13701/j.cnki.kqyxyj.2019.01.016
[10]	吴玉琼, 阮雅烨, 明佳俊, 等. 数字化技术在小口畸形牙列缺损修复中的应用[J]. 口腔疾病防治, 2020, 28(10):651-656. doi: 10.12016/j.issn.2096-1456.2020.10.007
[11]	Zhang Y, Luo J, Zhang YM, et al. Rehabilitation for a scleroderma patient with severe microstomia using digital and conventional methods[J]. J Am Dent Assoc, 2020, 151(9):684-690. doi: S0002-8177(20)30376-7 pmid: 32711806
[12]	钟拥军, 李振强, 刘艳艳, 等. 数字化印模对Kennedy二类牙列缺损可摘局部义齿临床适合性的影响[J]. 口腔颌面修复学杂志, 2022, 23(2):111-114.
[13]	Lee JH, Yun JH, Han JS, et al. Repeatability of intraoral scanners for complete arch scan of partially edentulous dentitions: An in vitro study[J]. J Clin Med, 2019, 8(8):1187. doi: 10.3390/jcm8081187
[14]	宁江海, 刘洪臣. 游离端可摘局部义齿修复的印模技术[J]. 中华老年口腔医学杂志, 2003, 1(2):113-116.
[15]	Lee JH, Lee CH. A stereolithographic resin pattern for evaluating the framework, altered cast partial removable dental prosthesis impression, and maxillomandibular relationship record in a single appointment[J]. J Prosthet Dent, 2015, 114(5):625-626. doi: 10.1016/j.prosdent.2015.05.011
[16]	Wu J, Cheng YC, Gao B, et al. A novel digital altered cast impression technique for fabricating a removable partial denture with a distal extension[J]. J Am Dent Assoc, 2020, 151(4):297-302. doi: S0002-8177(19)30908-0 pmid: 32081301
[17]	Suzuki Y, Harada N, Watanabe KI, et al. Clinical application of an intraoral scanner and CAD/CAM system for a Kennedy class Ⅰ partially edentulous patient[J]. J Oral Sci, 2022, 64(1):109-111. doi: 10.2334/josnusd.21-0409
[18]	Cameron AB, Evans JL, Robb ND. A technical and clinical digital approach to the altered cast technique with an intraoral scanner and polyvinyl siloxane impression material[J]. J Prosthet Dent, 2022:S0022-3913(22)00357-2.
[19]	王晓萌, 刘星纲, 江青松, 等. 模型修正技术下游离端黏膜的数字化分析[J]. 口腔医学研究, 2021, 37(6):559-563. doi: 10.13701/j.cnki.kqyxyj.2021.06.017
[20]	张力, 姚丽娜, 袁玮, 等. 数字印模技术在下颌游离端可摘局部义齿制作中的应用[J]. 口腔医学, 2021, 41(12):1111-1116.
[21]	Ender A, Mehl A. Accuracy of complete-arch dental impressions: A new method of measuring trueness and precision[J]. J Prosthet Dent, 2013, 109(2):121-128. doi: 10.1016/S0022-3913(13)60028-1 pmid: 23395338
[22]	Baghani MT, Shayegh SS, Johnston WM, et al. In vitro evaluation of the accuracy and precision of intraoral and extraoral complete-arch scans[J]. J Prosthet Dent, 2021, 126(5):665-670. doi: 10.1016/j.prosdent.2020.08.017
[23]	Iturrate M, Eguiraun H, Etxaniz O, et al. Accuracy analysis of complete-arch digital scans in edentulous Arches when using an auxiliary geometric device[J]. J Prosthet Dent, 2019, 121(3):447-454. doi: S0022-3913(18)30857-6 pmid: 30554826
[24]	Richert R, Goujat A, Venet L, et al. Intraoral scanner technologies: A review to make a successful impression[J]. J Healthc Eng, 2017, 2017:8427595.
[25]	Ren SX, Morton D, Lin WS. Accuracy of virtual interocclusal records for partially edentulous patients[J]. J Prosthet Dent, 2020, 123(6):860-865. doi: S0022-3913(19)30543-8 pmid: 31672422
[26]	Fattouh M, Kenawi LMM, Fattouh H. Effect of posterior span length on the trueness and precision of 3 intraoral digital scanners: A comparative 3-dimensional in vitro study[J]. Imaging Sci Dent, 2021, 51(4):399-406. doi: 10.5624/isd.20210076
[27]	Kim JE, Amelya A, Shin Y, et al. Accuracy of intraoral digital impressions using an artificial landmark[J]. J Prosthet Dent, 2017, 117(6):755-761. doi: 10.1016/j.prosdent.2016.09.016
[28]	杨鑫, 孙一飞, 田雷, 等. 模拟口腔取模环境下TRIOS数字印模的精密度[J]. 北京大学学报(医学版), 2015, 47(1):85-89.
[29]	Latham J, Ludlow M, Mennito A, et al. Effect of scan pattern on complete-arch scans with 4 digital scanners[J]. J Prosthet Dent, 2020, 123(1):85-95. doi: S0022-3913(19)30152-0 pmid: 30982616
[30]	Michelinakis G, Apostolakis D, Tsagarakis A, et al. A comparison of accuracy of 3 intraoral scanners: A single-blinded in vitro study[J]. J Prosthet Dent, 2020, 124(5):581-588. doi: 10.1016/j.prosdent.2019.10.023 pmid: 31870614
[31]	Müller P, Ender A, Joda T, et al. Impact of digital intraoral scan strategies on the impression accuracy using the TRIOS Pod scanner[J]. Quintessence Int, 2016, 47(4):343-349. doi: 10.3290/j.qi.a35524 pmid: 26824085
[32]	曹悦, 陈俊锴, 赵一姣, 等. 口内三维扫描技术临床应用精度的研究进展[J]. 中华口腔医学杂志, 2020, 55(3):201-205.
[33]	Atieh MA, Ritter AV, Ko CC, et al. Accuracy evaluation of intraoral optical impressions: A clinical study using a reference appliance[J]. J Prosthet Dent, 2017, 118(3):400-405. doi: S0022-3913(16)30603-5 pmid: 28222869
[34]	Hayama H, Fueki K, Wadachi J, et al. Trueness and precision of digital impressions obtained using an intraoral scanner with different head size in the partially edentulous mandible[J]. J Prosthodont Res, 2018, 62(3):347-352. doi: S1883-1958(18)30003-3 pmid: 29502933
[35]	Treesh JC, Liacouras PC, Taft RM, et al. Complete-arch accuracy of intraoral scanners[J]. J Prosthet Dent, 2018, 120(3):382-388. doi: S0022-3913(18)30077-5 pmid: 29724554

Application of digital impression technique in removable partial denture restoration and factors affecting its accuracy

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References 35

Related Articles 14

Recommended Articles

Metrics

Comments

[1]	WANG Han, HU Jian. Research progress of factors influencing the accuracy of digital impressions for implant restoration [J]. Stomatology, 2024, 44(3): 221-226.
[2]	JIN Min, CHEN Yumao, HAN Minxuan, LU Shijun. Application progress of digital indirect bonding technology in orthodontic bracket positioning [J]. Stomatology, 2024, 44(3): 227-231.
[3]	BAO Xudong, YUE Lin. Scanning accuracy of intraoral scanning systems and control of its influencing factors [J]. Stomatology, 2022, 42(9): 769-773.
[4]	CHEN Yuyan, ZHANG Zhihong, LIU Honghong, HAN Qian, CHEN Jia, DUAN Linna. Influence of cortical bone thickness in mandibular posterior region on the accuracy of implantation [J]. Stomatology, 2022, 42(8): 713-716.
[5]	WU Jiang, CHEN Jihua. Current application and future of digital technology in the manufacture of removable partial denture and complete denture [J]. Stomatology, 2022, 42(5): 385-390.
[6]	QIAN Fei, XIN Haitao, LI Yujiao, DIAO Xiao'ou, LUO Huiwen, LIU Huan, WU Yulu. Study on design optimization method of digital removable partial denture framework [J]. Stomatology, 2022, 42(12): 1073-1079.
[7]	. Application of digital impression technology in the fabrication of free end removable partial denture of mandible [J]. , 2021, 41(12): 1111-1116.
[8]	. An in vitro study of the precision of CAD/CAM guides in the posterior area [J]. , 2019, 39(1): 15-19.
[9]	. An in vivo evaluation of the accuracy of 3Shape TRIOS for the whole maxilla [J]. , 2018, 38(9): 808-813.
[10]	. Accuracy of digital impression in gingival soft tissues of patients with chronic periodontitis [J]. , 2018, 38(5): 422-427.
[11]	. A review of treatment options after failure of dental implant [J]. , 2017, 37(8): 736-741.
[12]	. The comparison of precision among three types method of cavity preparation directed by simple template of dental implant centered on repair. [J]. , 2016, 36(9): 832-834.
[13]	. The development and progress of the indirect bonding technology [J]. , 2015, 35(4): 318-320.
[14]	. Effects of the removable partial denture on IL-1β in gingival crevicular fluid of the type Ⅱ diabetic patients [J]. , 2015, 35(3): 208-210.